Abstract:Removal of dust and NOx from flue gas is highly significant for air pollution control, and integration of these two functions in one unit can greatly improve process efficiency. In this study, a functional catalytic bag-filter material (CBFM) was fabricated from commercial PTFE felt and cheap catalyst V2O5-WO3/TiO2 via a simple immersion-fixation procedure. The attachment of catalysts on PTFE was confirmed, and the material properties of CBFM of various loadings were determined. Their denitration and dedusting performances were investigated individually in lab-scale experiments. Compared to the original PTFE, CBFMs exhibited superior denitration activities, which were positively correlated with temperature (60–90% under 150–210 °C) and negatively correlated with filtration velocity (50–90% under 0.5–0.9 m min−1). On the other hand, introduction of catalysts in PTFE felt did not compromise its filtration efficiency, and almost complete dust removal was achieved. A simplified kinetic model was developed based on Eley-Rideal mechanism, to correlate the materials' denitration efficiency with various operational conditions. The model's accuracy was verified in both lab and pilot environments, where real flue gas from a waste incineration plant was treated with a scaled-up CBFM. In a six-day continuous test, the CBFM maintained >70% NO removal and >99.8% dust removal, confirming its stability and applicability in industrial settings. Therefore, this study offers a low-cost and functional bi-functional filter material capable of efficient simultaneous dedusting/denitration, as well as a simple and practical procedure for its manufacture. In addition, the kinetic model could be applied to speed up production and process optimization, and direct future application of similar materials in real environments.

Study of the denitration performance of a ceramic filter using a manganese-based catalyst

Fabrication of Catalytic Ceramic Nanofiber Membrane with High Permeability and Superior Catalytic Performance

Ceramic nanofiber membrane anchoring nanosized Mn<sub>2</sub>O<sub>3</sub> catalytic ozonation of sulfamethoxazole in water

Preparation of Catalytic Ceramic Nanofiber Membranes with MnFe Dual-Active Sites Enhancing Catalytic Ozonation of Sulfamethoxazole

Discovering the Remarkable Denox Activity and Anti-K Poisoning of MnFeOx/H-Beta Composite Catalyst

The Denitration and Dedusting Behavior of Catalytic Filter and Its Industrial Application in Glass Kilns

Integration of dedusting and denitration in V2O5-WO3/TiO2/PTFE-based catalytic bag-filter materials: Lab- and pilot-scale testing and development of SCR models

MnOx-CuOx cordierite catalyst for selective catalytic oxidation of the NO at low temperature

Experimental Study on the Desulfurization, Denitration, and Dust Removal Characteristics of Ceramic Fiber Filter Tubes

Synergistic Removal of NOx and VOCs from Flue Gas on Mn-Based Catalysts

Ordered mesoporous carbon loading Cu-Mn bi-metal denitration catalyst and preparation method thereof

Gravity-driven ceramic membrane (GDCM) filtration treating manganese-contaminated surface water: Effects of ozone(O3)-aided pre-coating and membrane pore size

Experimental Research on Low Temperature Manganese Oxides SCR Denitrification for Oxy-Fuel Combustion Flue Gas

Denitration catalyst containing tungsten tin manganese cerium composite oxide as well as preparation and application of denitration catalyst

Fabrication of Mn Oxide Incorporated Ceramic Membranes for Membrane Fouling Control and Enhanced Catalytic Ozonation of P -Chloronitrobenzene

Mn-doped Carbon-Al2sio5 Fibers Enable Catalytic Ozonation for Wastewater Treatment: Interface Modulation and Mass Transfer Enhancement.

A Strategy for Constructing Highly Efficient Co3O4-C@SiO2 Nanofibers Catalytic Membrane for NH3-SCR of NO and Dust Filtration

Ni-Induced C-Al2O3-Framework (nicaf) Supported Core-Multishell Catalysts for Efficient Catalytic Ozonation: A Structure-to-Performance Study.

Revealing the reaction regularity of Mn-CeO2-x catalyst system in catalytic filter for low-temperature NH3-SCR

Comparing Mn-based oxides filters started by KMnO4 versus K2FeO4 for ammonium and manganese removal: Formation mechanism of active species

Mn-Ce supported low temperature denitration catalyst and preparation method thereof