Abstract:A steel–concrete composite beam bridge fully exploits the mechanical advantages of the concrete structure and steel structure, and has the advantages of a fast construction speed and large stiffness. It is of certain research value to explore the application of this bridge type in the field of railway bridges. However, with the rapid development of domestic high-speed railway construction, the problem of vibration and noise radiation of high-speed railway bridges caused by train loads is becoming more and more serious. A steel–concrete composite beam bridge combines the tensile characteristics of steel and the compressive characteristics of concrete perfectly. At the same time, it also has the characteristics of a steel bridge and concrete bridge in terms of vibration and noise radiation. This feature makes the study of the vibration and noise of the bridge type more complicated. Therefore, in this paper, the characteristics of vibration and noise radiation of a high-speed railway steel–concrete composite box girder bridge are studied in detail from two aspects: the theoretical basis and a numerical simulation. The main results obtained are as follows: Relying on the idea of vehicle–rail–bridge coupling dynamics, a structural dynamics analysis model of a steel–concrete combined girder bridge for a high-speed railroad was established, and numerical program simulation of the vibration of the vehicle–rail–bridge coupling system was carried out based on the parametric design language of ANSYS 18.0 and the language of MATLAB R2021a, and the structural vibration results were analyzed in both the time domain and frequency domain. By using different time-step loading for the vehicle–rail–bridge coupling vibration analysis, the computational efficiency can be effectively improved under the condition of guaranteeing the accuracy of the result analysis within 100 Hz. Based on the power flow equilibrium equation, a statistical energy method of calculating the high-frequency noise radiation is theoretically derived. Based on the theoretical basis of the statistical energy method, the high-frequency noise in the structure is numerically simulated in the VAONE 2021 software, and the average contribution of the concrete roof plate to the three acoustic field points constructed in this paper is as high as 50%, which is of great significance in the study of noise reduction in steel–concrete composite girders.

Hybrid control of steel-concrete composite girder bridges considering the slip and shear-lag effects with MR–TMD based on train-bridge interactions

Vibration Control of the Steel-Concrete Composite Box Girder Bridge with Slip and Shear-Lag Effects by MTMDs under the Train-Bridge Interaction

Response and Vibration Control of Steel Box-girder Bridge When Vehicles Passing through the Expansion Joint

Simulation Vibration Analysis of Train and Railway Continuous Steel Truss Bridge

Simulation Study on Train-Induced Vibration Control of a Long-Span Steel Truss Girder Bridge by Tuned Mass Dampers

Human-Simulated Intelligent Control of Train Braking Response of Bridge with Mrb

Static Mechanics and Dynamic Analysis and Control of Bridge Structures Under Multi-Load Coupling Effects

Simulation analysis and control research of long multi-span composite bridge with incremental launching construction

Control Mechanism and Noise Reduction Effect of CVDM on Rail Transit Steel Bridge: Experimental and Numerical Study

Dynamic Analysis of a Steel–Concrete Composite Box-Girder Bridge–Train Coupling System Considering Slip, Shear-Lag and Time-Dependent Effects

Numerical investigation of the dynamic responses of steel-concrete girder bridges subjected to moving vehicular loads

Lateral Vibration Mitigation for Coupled High-Speed Rail Vehicle and Cable-Stayed Bridge System Subjected to Ground Motions

Dynamic Response of a Long-Span Concrete-Filled Steel Tube Tied Arch Bridge and the Riding Comfort of Monorail Trains

Real-time hybrid simulation of a complex bridge model with MR dampers using the convolution integral method

Dynamic analysis of a coupled steel-concrete composite box girder bridge-train system considering slip and shear-lag

Seismic damage control of nonlinear continuous reinforced concrete bridges under extreme earthquakes using MR dampers

Dynamic Response Analysis of Vehicle–Bridge Coupled Systems of Low-to-Medium-Speed Maglev Long-Span Bridges

Train–Bridge Coupled Vibration of a Long-Span Steel Truss Suspension Bridge Under Complex Driving Conditions

Study on Vibration and Noise of Railway Steel–Concrete Composite Box Girder Bridge Considering Vehicle–Bridge Coupling Effect

Numerical Investigation on Dynamic Interactions of Non-Contact Maglev Vehicle and Two-Span Steel Continuous Bridge Induced by High-Frequency Vibration Modes