Abstract:Assembly construction is the main feature of industrialized bridges, and π-shaped section steel–concrete composites that are continuously rigid have been widely used in engineering fields in recent years; however, their dynamic responses and corresponding impact coefficients in positive and negative moment regions need to be further studied. First, considering the interface slip model, we established a finite element model for the π-shaped continuous region section of the steel–concrete composite on the Sutai Expressway Tongfu No. 3 viaduct. Second, the bridge deck unevenness parameters were generated by preparing a MATLAB program with random calculations and were added to the bridge deck as the excitation load along with the vehicle load. Such parameters are defined on the basis of considering the vertical degrees of freedom of the four wheels and of one vehicle rigid body. Finally, we analyzed the displacement or stress impact coefficients as the dynamic response index of the bridge by adjusting the vehicle travel speeds, vehicle weights, interface slip stiffness values, and deck unevenness values. The results show that the change in vehicle travel speed and the change in vehicle load weight have some influence on the change in the dynamic effect of the combined beam, but this change is not significant. Moreover, the unevenness and interface slip strength changes have a large effect on the dynamic effect of the combination beam, which can significantly change the impact coefficient of the combination beam bridge. The worse the unevenness of the bridge deck is, the lower the grade of interface slip for the steel–concrete composite bridges and the higher the impact coefficient. We calculated the recommended impact coefficient values of the steel–concrete composite bridge based on the specifications for various countries, and they range from 1.16 to 1.4; such values are similar to the finite element calculation results.

Dynamic analysis of a coupled steel-concrete composite box girder bridge-train system considering slip and shear-lag

Research on computational method and dynamic characteristics of traffic vibration of steel bridge

Dynamic Analysis of a Steel–Concrete Composite Box-Girder Bridge–Train Coupling System Considering Slip, Shear-Lag and Time-Dependent Effects

Reduced Stiffness of Composite Beams Considering Slip and Shear Deformation of Steel

Analysis of Composite Beams with Interlayer Slip

Simulation Vibration Analysis of Train and Railway Continuous Steel Truss Bridge

Vibration Control of the Steel-Concrete Composite Box Girder Bridge with Slip and Shear-Lag Effects by MTMDs under the Train-Bridge Interaction

Dynamic Analysis and Model Test on Steel-Concrete Composite Beams under Moving Loads

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Dynamic analysis of train and bridge in crosswinds based on a coupled wind-train-track-bridge model

Analysis of Shear Connector of Steel–Concrete Composite Box-Girder Bridge Considering Interfacial Bonding and Friction

Random dynamic analysis on a high-speed train moving over a long-span cable-stayed bridge

Dynamic Response of a Long-Span Concrete-Filled Steel Tube Tied Arch Bridge and the Riding Comfort of Monorail Trains

Fatigue assessment of a composite railway bridge for high speed trains. Part II: Conditions for which a dynamic analysis is needed

Influence analysis of group studs stiffness in accelerated construction steel-concrete composite small box girder bridges

Fatigue Evaluation of Steel Bridge Details Integrating Multi-Scale Dynamic Analysis of Coupled Train-Track-Bridge System and Fracture Mechanics

Three-dimensional train–track–bridge coupled dynamics model based on the explicit finite element method

Dynamic Analysis of Coupled Train and Cracked Bridge Systems Using Multiscale Finite Element Modeling

Numerical Investigation on the Dynamic Performance of Steel–Concrete Composite Continuous Rigid Bridges Subjected to Moving Vehicles

Hybrid control of steel-concrete composite girder bridges considering the slip and shear-lag effects with MR–TMD based on train-bridge interactions