Abstract:In this work, we quantify field emission properties of cathodes made from carbon nanotube (CNT) fibers. The cathodes were arranged in different configurations to determine the effect of cathode geometry on the emission properties. Various geometries were investigated including: 1) flat cut fiber tip, 2) folded fiber, 3) looped fiber and 4) and fibers wound around a cylinder. We employ a custom field emission microscope to quantify I-V characteristics in combination with laterally-resolved field-dependent electron emission area. Additionally we look at the very early emission stages, first when a CNT fiber is turned on for the first time which is then followed by multiple ramp-up/down. Upon the first turn on, all fibers demonstrated limited and discrete emission area. During ramping runs, all CNT fibers underwent multiple (minor and/or major) breakdowns which improved emission properties in that turn-on field decreased, field enhancement factor and emission area both increased. It is proposed that breakdowns are responsible for removing initially undesirable emission sites caused by stray fibers higher than average. This initial breakdown process gives way to a larger emission area that is created when the CNT fiber sub components unfold and align with the electric field. Our results form the basis for careful evaluation of CNT fiber cathodes for dc or low frequency pulsed power systems in which large uniform area emission is required, or for narrow beam high frequency applications in which high brightness is a must.

Field Emission Nanoemitters Based on T-Contact Connections from Single-Walled Carbon Nanotubes and Graphene Zigzag Nanoribbons Covalently Bound to Them

Carbon Nanotubes And Their Potential Field Emission Applications

Carbon Nanotubes As Field Emission Sources

Field Emission From Short And Stubby Vertically Aligned Carbon Nanotubes

Lateral Field Emitters Fabricated Using Carbon Nanotubes

Fabrication of Carbon Nanotube Lateral Field Emitters

Contacting individual graphene nanoribbons using carbon nanotube electrodes

Achieving High-Current Carbon Nanotube Emitters

Efficient Carbon Nanotube Field Emitter Using Electrospun Carbon Nanofibers as a Flexible Electrode

Novel Nanostructured Carbon Nanotube Electron Sources

Fabrication and electrical characteristics of carbon nanotube field emission microcathodes with an integrated gate electrode

Field emission from a new form of thin film amorphous carbon having nanoparticle inclusions and carbon nanotubes

Hot electron field emission via individually transistor-ballasted carbon nanotube arrays.

Carbon Nanotube Lateral Field Emission Device with Embedded Field Effect Transistor

Influence of thermal contact resistance on the field emission characteristics of a carbon nanotube

Field emission from combined structures of carbon nanotubes and carbon nanofibers

A Simple Method To Make Field Emitter Using Ropes Of Single-Walled Carbon Nanotubes

Single-Walled Carbon Nanotube Thermionic Electron Emitters With Dense, Efficient And Reproducible Electron Emission

Field emission microscopy of carbon nanotube fibers: evaluating and interpreting spatial emission

Ultimately-scaled electrodes for contacting individual atomically-precise graphene nanoribbons

Field emission from carbon nanotube fibers in varying anode-cathode gap with the consideration of contact resistance