Abstract:The static drill rooted nodular (SDRN) pile is a new type of composite pile that consists of a precast pile and surrounding cemented soil. Its cost advantages and environmentally friendly construction have been proven in applications in Southeast China. Moreover, the composition of pipe pile and nodular pile is based on the load transfer mechanisms of a pile foundation, which is effective in optimal design. This paper presents a field study on the behavior of SDRN piles under compression. The load-displacement response, axial force, mobilized load of pile cap, skin friction, and tip resistance of the composite pile are discussed. Here, the bilinear base load-displacement model was adopted to analyze the test results. It is found that providing caps on the static drill rooted piles takes full advantage of the static drill rooted method, and drilling and grouting into the soil beneath the cap, which can be considered a type of ground improvement treatment, can increase the bearing capacity of the pile cap; thus, setting a pile cap for this type of piles is recommended. The existence of the caps in the field tests decreased the skin friction of the upper part of pile shaft because of the additional settlement of the surrounding soil, which developed owing to the pressure from the caps. The frictional capacity of the concrete-cemented soil interface was much higher than that of the cemented soil-soil interface. The skin friction of the lower part of the pile shaft was about 1.25 times in clayey soil and 2.0 times in sandy soil compared with the bored pile. It can be concluded that the cemented soil-soil interface of the SDRN pile was probably better than the concrete-soil interface of the bored pile. The test results fitted the first stage curve of the bilinear model well, and it can be supposed that the base soil was strengthened because of the permeation of the cement paste.

Study on new test technology of pile foundation bearing capacity

A New and Openly Accessible Database of Tests on Piles Driven in Sands

Experimental Analysis of Bearing Capacity of Cast-in-place Tubular Pile

A test on base bearing capacity of static drill rooted nodular pile

STUDY ON VERTICAL BEARING CAPACITY OF LARGE-DIAMETER CAST-IN-SITU THIN-WALL TUBULAR PILE

Field Tests and Simplified Calculation Method for Static Drill Rooted Nodular Pile

Test Research on the Behavior of Composite Foundations Incorporating Rigid and Flexible Piles

In-situ test of bearing capacity behavior of composite foundation with rigid-flexible piles

Field Trials on Monotonic Behaviour of a Driven Pile at an Offshore Wind Farm in China

Experimental Study on Behavior of Composite Foundation with Rigid-Flexible Piles

A NEW CALCULATION METHOD FOR LARGE-DIAMETER-TUBULAR-PILE BEARING CAPACITY

A Model Test on the Behavior of A Static Drill Rooted Nodular Pile under Compression

Bearing Capacity And Load Transfer Mechanism Of Static Drill Rooted Nodular Piles

Pile Foundation Test Experimental Program of Lanzhou New City Science and Technology Innovation

A Field Study on the Behavior of Static Drill Rooted Nodular Piles with Caps under Compression

Model Test on Load Transfer Mechanism of a Static Drill Rooted Nodular Pile

Bearing Capacity and Load Transfer Mechanism of a Static Drill Rooted Nodular Pile in Soft Soil Areas

Static Load Test of a Project CFG Pile Composite Foundation

A Novel Method for Testing the Effect of Base Post-Grouting of Super-Long Piles

Experimental Study on Bearing Capacity Behavior of Deep Large Diameter Cast-in-place Belled Pile

Research on In-Situ Tests of Pile Load Transfer Behaviors in Composite Foundation with Rigid-Flexible Piles