Abstract:Flexible piezoelectric functional composite materials have the advantages of strong plasticity and good surface adhesion, and show great potential in smart wearable devices, electronic skin and other applications. However, due to the complexity of traditional preparation process, high molding cost and poor air permeability, its further development is limited. Direct ink writing (DIW) 3D printing technology is a rapid prototyping technology, with higher flexibility, faster manufacturing speed and lower manufacturing costs, is widely used in metal, ceramic and composite material molding. In this work, a ink system with polydimethylsiloxane (PDMS) as binder and barium titanate (BTO) ceramic powder as piezoelectric filler was developed, the printing work of flexible porous BTO/PDMS composite material was completed. DIW dual-nozzle printing technology was applied to realise "electrode-piezoelectric-electrode" integrated flexible porous functional gradient structure composites in this study. The results show that the BTO/PDMS ink has the characteristics of shear thinning. When the nozzle diameter is 0.5 mm, the printing speed is 650 mm/min, and the BTO mass fraction is 80%, the flexible porous piezoelectric composite with high precision and complex structure is printed. By phase analysis of BTO/PDMS, it is found that the sample has the characteristic peak of BTO. The microstructure analysis shows that the surface of the sample has good structural fidelity and there are a few island-like pores in the interior. The mechanical test shows that the maximum tensile strength of the sample is 1.33 MPa, the elastic modulus is 1.72 MPa, the longitudinal piezoelectric coefficient d 33 is 4.37 Pc/N, and the open circuit voltage VOC is 3.17 V. This work demonstrates an attractive method of moulding flexible piezoelectric materials with an "electrode-piezoelectric-electrode" structure, which provides a reference to current 3D printing flexible material fabrication techniques due to its simplicity of operation, time and manufacturing cost savings.

Direct Ink Write 3D printing of Wave Propagation Sensor

Ferroelectric Thin-Film Active Sensors for Structural Health Monitoring

Direct ink write multi-material printing of PDMS-BTO composites with MWCNT electrodes for flexible force sensors

A 3D Printed, Constriction-Resistive Sensor for the Detection of Ultrasonic Waves

High-Performance Auxetic Bilayer Conductive Mesh-Based Multi-Material Integrated Stretchable Strain Sensors.

A Conductive and Anti-impact Composite for Flexible Piezoresistive Sensors

All Digital Light Processing‐3D Printing of Flexible Sensor

A stretchable flexible strain sensor with high sensitivity and fast response fabricated by embedded 3D printing of the hybrid polydimethylsiloxane/conductive carbon paste composites

Flexible Multifunctional Sensors Using 3-D-Printed PEDOT:PSS Composites

Study on the control of mechanical and electrical properties of 3d printed BTO/PDMS flexible porous composites

Inkjet-Printed Multiwalled Carbon Nanotube Dispersion as Wireless Passive Strain Sensor

Ultra-Wide Range, High Sensitivity Piezoresistive Sensor Based on Triple Periodic Minimum Surface Construction

Screen-Printed PVDF Piezoelectric Pressure Transducer for Unsteadiness Study of Oblique Shock Wave Boundary Layer Interaction

Bidirectional and Stretchable Piezoresistive Sensors Enabled by Multimaterial 3D Printing of Carbon Nanotube/Thermoplastic Polyurethane Nanocomposites

3D Printing of Stretchable Strain Sensor Based on Continuous Fiber Reinforced Auxetic Structure

3D-Printable Carbon Nanotubes-Based Composite for Flexible Piezoresistive Sensors

Mechanochemically responsive polymer enables shockwave visualization

Design and Fabrication of Flexible Capacitive Sensor With Cellular Structured Dielectric Layer via 3D Printing

Enhanced electrical conductivity in laser-induced graphene-silicon carbide laminated nanosheets for flexible strain sensors and pulse wave velocity assessment

3D printed continuous wire polymer composites strain sensors for structural health monitoring

Wearable Tactile Sensors Customized with Hierarchical Microdomes via Direct Ink Writing