Abstract:Construction and infrastructure are the fastest growing industries and concrete is the second highest used resource in today’s scenario after water which leads to huge quantities of C&D waste (construction and demolition). This creates a significant problem because of the difficulties associated with managing the increased volume of concrete waste. The various studies related to sustainable concrete construction have encouraged recycled aggregate which is a Replacement of natural aggregate in concrete mixes. As a result, use of recycled aggregate it can reduce the amount of landfill as well as requirement of virgin aggregate. In this experimental study the natural coarse aggregate is replaced with 0%, 25%, 50%, 75%, and 100%, with recycled coarse aggregate. The strength of concrete decrease with increase in the percentage of recycle aggregate, this is due to improper bonding between the cement paste and aggregate. The significance of silica fume in concrete mix will improve the bonding and quality of recycled aggregates in concrete. The percentage of partial replacement will be 0%, 10%, 15%, with silica fume. And also to increase the tensile strength of concrete we use glass fibers with different percentages 0.005%, 0.015% and 0.025%. Concrete specimen will be casted with Triple mixing method (TM). In this experiment concrete made with silica fume with partial replacement of cement, Glass Fibers are added to the cement and recycled coarse aggregate as Replacement of natural coarse aggregate will be studied to improve the workability, compressive strength, and tensile strength. In this study, the mixing of concrete is done by triple mix method. With silica fume as an admixture recycled aggregate concrete of M35 grade will be manufactured and tested for physical and mechanical properties. These strength results obtained is compared with conventional concrete results. The target strength is achieved in compression at 12.5% replacement of silica fume, 0.005% addition of S-Glass fibers and also in tension at 12.5% replacement of silica fume, 0.015% addition of S-Glass fibers.

Mix proportion for medium grade concrete with silica fume as cement replacement for general purpose construction

Effect of Adding Solid Waste Silica Fume As a Cement Paste Replacement on the Properties of Fresh and Hardened Concrete

Strength and Durability Studies on Hybrid Fiber Reinforced High-Performance Concrete for Silica Fume Based Mineral Admixture

Effect of ferrosilicon and silica fume on mechanical, durability, and microstructure characteristics of ultra high-performance concrete

Examination of Halfway Substitution of Cement M20 Concrete with Silica Rage and Quartz Sand in Fine Total

Developing a sustainable concrete incorporating bentonite clay and silica fume: Mechanical and durability performance

Experimental study on the mechanical behavior of concrete incorporating fly ash and marble powder waste

THE USE OF MICRO-SILICA TO IMPROVE THE COMPRESSIVE AND FLEXURAL STRENGTH OF CONCRETE

Enhancing Concrete Performance with Waste Foundry Sand Using Ternary Blended Mixes of Ordinary Portland Cement, Silica Fume, and Ground Granulated Blast Furnace Slag

Influence of silica fume on the workability and hydration process of ultra-high performance concrete

Application of silica fume in high-volume fly ash self-compacting recycled aggregate concrete

Synergistic Effects of Silica Fume And Steel Slag And Steel Slag In Advanced Concrete Composites

Significance of Silica Fume and Glass Fiber on the Mechanical Properties of Recycled Aggregate Concrete

Concrete Mix Strength and Permeability with Various Supplementary Cementitious Materials

Effects of Percentages and Effective Cementitious Coefficient of Zeolite and Silica Fume on the Compressive Strength and Water Absorption of Concrete

Effects of silica fume addition and water to cement ratio on the properties of high-strength concrete after exposure to high temperatures

Rubber fibre reinforced geopolymer concrete with silica fumes as a replacement for fine aggregate

Efficiency of Supplementary Cementitious Materials and Natural Fiber on Mechanical Performance of Concrete

Quality Characteristics of Sustainable High-Performance Concrete Formulated from Binary, Ternary, and Quaternary Supplementary Cementitious Materials Under Various Curing Conditions

A study on mix design of high-performance fine-grained concrete using sea-sand

Early-Age Hydration Reaction and Strength Formation Mechanism of Solid Waste Silica Fume Modified Concrete