Abstract:Suffering low frequency and small amplitude shaking, energy dissipation of long overhanding structures on the spacecraft under weightless environment is a key research topic for the safety of such spacecraft. The paper presented a novel magnetic fluid shock absorber to reduce the vibration of low frequency and small amplitude. The proposed shock absorber had the composite magnet structure including three magnets in the working element and it was attached with different inner surface materials. To the best of our knowledge, this was the first time to consider the relationship between inner surface materials and damping performance of the shock absorber. First, the damping performance of the shock absorber with various magnetic fluid volume percentage and gap size was investigated by reducing the free oscillations of the brass plate. Meanwhile, the magnetic restoring force between the working element and the repulsion magnet was measured. The experimental results showed that the magnetic restoring force versus the distance was almost linear, under small amplitude. When the distance was greater than 20mm, the approximate calculation formula of the equivalent stiffness could be obtained. We analyzed the influence of the different internal surface materials of the shock absorber on the damping performance by calculating the fluid resistance which was determined by both the viscous shear force and the capillary force. Experimental results verified that the capillary force had a significant influence on fluid resistance and couldn't be ignored. In terms of the vibration decay time, the damping efficiency of chemigum was 61.39% and 57.87% better than that of fluororubber for the gap of 2mm and 3mm respectively. According to the logarithmic decay rate, the damping efficiency of chemigum was 2.965 times that of fluororubber under the gap of 2mm and was 2.515 times under the gap of 3mm. For the reason that the shock absorber was used in aerospace, weight was an important factor. Our experiments proved that we must take into account both the densities of materials and the damping performance when selecting inner surface materials.

Investigation of the dynamics of a small spacecraft elastic element temperature change under a temperature shock considering a penumbral section

Modeling the temperature shock impact on the movement of a small technological spacecraft

Consideration of the Initial Deformation From Natural Oscillations of Large Elastic Elements of the Spacecraft When Assessing Microaccelerations From Thermal Shock Using a Two-dimensional Model of Thermal Conductivity

Research of influence of temperature deformations of the big elastic elements on dynamics of a space vehicle

Modeling the effect of temperature deformations of large elements on the dynamics of the orbital motion of a small spacecraft

Dynamic Behavior of an Elastic/Pyroelectric Composite Hollow Sphere under Thermal Environments

TRANSIENT THERMAL ANALYSIS OF PARABOLIC ANTENNA REFLECTOR ON ORBIT

Modeling and Thermal Analysis of a Moving Spacecraft Subject to Solar Radiation Effect

Thermal-structural coupled tube element of multibody dynamics and its aplication

Design of Clearance Fit Between Pico-Satellite and Its Separation Mechanism Based on Thermal-Structure Coupling

Thermal shock investigation on solid cylinders subjected to rapid energy deposition

On-orbit thermal deformation prediction for a high-resolution satellite camera

Analytical study of heat transfer of high-temperature and high-velocity flow field behind shock waves

Application of Stress Wave Theory for Pyroshock Isolation at Spacecraft-Rocket Interface

THERMAL RADIATION ANALYSIS OF SPACECRAFT ON INCLINED NEAR-EARTH ORBIT

Dynamic-Envelope Analysis of Clamp-Band Joint Considering Pyroshock of Satellite Separation

Experimental Investigation of Heat Flux Characteristics on the Thermally Induced Vibration of a Slender Thin-Walled Beam

The dynamics analysis of a magnetic fluid shock absorber with different inner surface materials

Thermal Flutter Analysis of a Spacecraft with a Flexible Appendage Based on FEM

Thermal alternation induced vibration analysis of spacecraft with lateral solar arrays in orbit

Design and thermal characteristic test of a temperature control system for spacecraft precision instrument