Abstract:We report a fluoride-free comparative study with promising results of an alkali-assisted roasting with KOH and water-based leaching of the Nigerian and Rwandan columbite-tantalite concentrates and application of guanidine carbonate to extract Nb and Ta as mixed oxides. The results proved that the alkali-assisted roasting the sample with KOH at optimum conditions, (250 °C, 100 % flux-to-concentrate ratio, 1 h), facilitated open-up of the (Nb–Ta)-minerals and induced their water solubilities. However, the Nigerian sample seems to be highly soluble relatively to the Rwandan sample. In all investigated cases, most of tin and iron in form of cassiterite and hematite and other impurities remained in the residue and their dissolutions decreased as temperature increased. Guanidine carbonate was used to extract both Nb and Ta dissolved in the pregnant leach solution of the Nigerian and Rwandan columbite-tantalite concentrate samples. The (Nb–Ta)-guanidine precipitate with purity of more than 95.0 % was recovered from leach liquor solution of −250 μm size fraction containing Nb (48.5 %), Ta (47.5 %), with Fe (2.6 %) and Mn (0.1 %) for N-Nass Con sample. For R-KMY Con sample, similar precipitate with purity of more than 94.0 % with chemical compositions of Nb (28.45 %), Ta (65.75 %) along with Fe (3.32 %) and Mn (0.77 %) was obtained from leach liquor of +250 μm size fraction. The amorphous (Nb–Ta)-guanidine precipitate was then calcined at 900 °C and converted the metals into their mixed oxides with high purity (more than 99%) and removed the guanidine as evidenced with their crystallographic peaks. The study presents a potential alternative to HF and promising opportunity for the sustainable extraction of Nb and Ta while the world is shifting toward clean energy.

Hydrochloric Acid Leaching Approaches for Tantalum and Niobium Pentoxides Enrichment in 1st Tin Slag from Bangka Island

Other Oxides Pre-removed from Bangka Tin Slag to Produce a High Grade Tantalum and Niobium Oxides Concentrate

Enrichment of Tantalum and Niobium Contents in Bangka Tin Slag by NaOH and H3PO4Leaching

Upgrading tantalum and niobium oxides content in Bangka tin slag with double leaching

Development of a process for the concentration of the strategic tantalum and niobium oxides from tin slags

Extraction of niobium in one step from tin slag by NH4F‐HCl leaching process

Recovery of Niobium and Tantalum from LowGrade Tin Slag - A Hydrometallurgical Approach

Efficient Extraction of Ta and Nb from a Coltan Ore Through Alkaline Roasting, Water Leaching, Precipitation, and Oxalic Acid Leaching

Enrichment of tantalum and niobium from tungsten residue by hydrochloric acid method

Extraction of Niobium from Tin Slag

An investigation on hydrofluoric (HF) acid-free extraction for niobium oxide (Nb2O5) and tantalum oxide (Ta2O5) from columbite/tantalite concentrates using alkali reductive roasting

Fluoride-free, simple, and environmentally friendly extraction of mixed oxides of niobium and tantalum from the Nigerian and Rwandan columbite-tantalite concentrates

Extraction of Niobium and Tantalum Oxides From Columbite Concentrate Using Microwave Processing and Solvent Extraction

Beneficiation of Niobium and Tantalum from Tantalite Ore Using Physical and Chemical Processes

Study on Tantalum and Niobium Recovery by Acid Leaching and Sodium Alkali Fusing from Tungsten Residue

Production of pure tantalum and niobium oxides by hydrometallurgical processing of coltan smelter cake from Tanganyika Province/RD Congo using NH4HF2-KOH flux system.

Leaching of niobium and tantalum from a low-grade ore using a KOH roast–water leach system

Mineralogical Properties of a Refractory Tantalum-Niobium Slag and the Effect of Roasting on the Leaching of Uranium-Thorium