Abstract:The extraction of niobium and tantalum from two tantalum-niobium ore materials obtained from Mozambique, using a combination of magnetic separation, acid leaching, solvent extraction and ion exchange methods was investigated. One sample consisted mainly of manganotantalite while the other of ferrotantalite. The magnetic separation procedure removed 61.8(2)% Fe2O3 and 46.4(4)% TiO2 from the ferrotantalite and 8.9(3)% Fe2O3 and 8.8(7)% TiO2 from manganotantalite. H2SO4 leaching removed 62.3(6)% U3O8 and 61.1(3)% ThO2 from manganotantalite and 73.6(2)% U3O8 from ferrotantalite. Ammonium bifluoride dissolution and subsequent H2SO4 5-methyl-2-hexanone (MIAK) extraction proved to be the most efficient procedure for separation and isolation of a high purity tantalum oxide. The optimal conditions for Ta separation were 4.0 M H2SO4 aqueous solution and organic:aqueous ratio (O/A) = 1:1. Stripping was accomplished using double distilled water. Recoveries of 100.8(3)% Ta2O5 and 0.20(3)% Nb2O5 for manganotantalite, and 100.50(9)% Ta2O5 and 0.67(6)% Nb2O5 for ferrotantalite were obtained in the strip solutions. Nb was isolated from the mineral matrices using Dowex Marathon anion exchange resin. Recoveries of 100.2(4)% and 94.5(4)% Nb2O5 for manganotantalite and ferrotantalite samples respectively were obtained in the 6.0 M HCl elution, while the other elements were eluted with 4.0 M HCl. The entire process resulted in a total loss of approximately 13% for both Nb2O5 and Ta2O5 with approximately 96% purity for both metal oxides. Average recoveries of 97.8(7)% Ta2O5 and 1.4(6)% Nb2O5 were obtained in the Ta rich product while 0.8(4)% Ta2O5 and 94.4(5)% Nb2O5 were obtained in the Nb rich product.

Recovery of Niobium and Tantalum from LowGrade Tin Slag - A Hydrometallurgical Approach

Development of a process for the concentration of the strategic tantalum and niobium oxides from tin slags

Extraction of niobium in one step from tin slag by NH4F‐HCl leaching process

Niobium and tantalum recovery from the primary source and from tin slag, an industrial challenge: a review

Investigations on Flowsheet Development for the Treatment of Niobium-Tantalum Bearing Cassiterite

Enrichment of tantalum and niobium from tungsten residue by hydrochloric acid method

Extraction of Niobium from Tin Slag

Simulation to Recover Niobium and Tantalum from the Tin Slags of the Old Penouta Mine: A Case Study

Hydrochloric Acid Leaching Approaches for Tantalum and Niobium Pentoxides Enrichment in 1st Tin Slag from Bangka Island

Recovery of niobium and tantalum by solvent extraction from Sn–Ta–Nb mining tailings

Other Oxides Pre-removed from Bangka Tin Slag to Produce a High Grade Tantalum and Niobium Oxides Concentrate

Selective recovery of niobium and tantalum from low-grade concentrates using a simple and fluoride-free process

Beneficiation of Niobium and Tantalum from Tantalite Ore Using Physical and Chemical Processes

Enrichment of Tantalum and Niobium Contents in Bangka Tin Slag by NaOH and H3PO4Leaching

An investigation on hydrofluoric (HF) acid-free extraction for niobium oxide (Nb2O5) and tantalum oxide (Ta2O5) from columbite/tantalite concentrates using alkali reductive roasting

Recovery Leaching of Niobium from Metallurgical Residues

Hydrometallurgical Separation of Niobium and Tantalum: A Fundamental Approach