Abstract:The production of high purity niobium (Nb) or tantalum (Ta) compounds still relies on processes that require highly acidic conditions and concentrated HF or NH4F solutions. Recent progress in the chemistry of group V elements, along with the evolution of the environmental concerns, call for the development of more sustainable industrial processes for these strategic elements. In sharp contrast with the historical fluoride approach chosen by the Nb and Ta refining industry, there has been a recent surge in the literature concerning the chemistry of these elements in diluted alkaline or oxalate media. We here propose an innovative liquid-liquid extraction process that is amenable to separate Nb and Ta from alkaline feed solutions, can be operated at low acidity and that does not require any fluoride-based chemical. The developed strategy is as follows: first, Nb and Ta are co-extracted from their alkaline solution (pH 12) using a quaternary ammonium salt (Aliquat® 336) dissolved in an organic diluent; then, Nb is selectively back-extracted in a mixture of diluted nitric and oxalic acids; and finally, Ta is stripped in a diluted nitric media. The process also affords purifying Nb from Ti, Fe and Na. Following an optimization at laboratory scale, the full process has been validated during continuous running tests (160 h at 1.4 L h−1) using industrial Nb-Ta caustic solutions coming from the development of the so-called Maboumine process. The developed process works at room temperature, low acidity ([H+] < 1 M), exhibits high recovery yields, and allows producing Nb2O5·nH2O with purity higher than 99.5%. The process also yields a tantalum product (Ta2O5·nH2O with >20 wt% Ta) even when starting from a diluted feed (39 ppm Ta). The proposed strategy paves the way for new Nb and Ta hydrometallurgical processes operating under mild chemical environments and represents a concrete alternative to the current fluoride-intensive industrial methods.

Production of pure tantalum and niobium oxides by hydrometallurgical processing of coltan smelter cake from Tanganyika Province/RD Congo using NH4HF2-KOH flux system.

Beneficiation of Niobium and Tantalum from Tantalite Ore Using Physical and Chemical Processes

Fluoride-free, simple, and environmentally friendly extraction of mixed oxides of niobium and tantalum from the Nigerian and Rwandan columbite-tantalite concentrates

Efficient Extraction of Ta and Nb from a Coltan Ore Through Alkaline Roasting, Water Leaching, Precipitation, and Oxalic Acid Leaching

Hydrometallurgical Separation of Niobium and Tantalum: A Fundamental Approach

An investigation on hydrofluoric (HF) acid-free extraction for niobium oxide (Nb2O5) and tantalum oxide (Ta2O5) from columbite/tantalite concentrates using alkali reductive roasting

Extraction of Niobium and Tantalum Oxides From Columbite Concentrate Using Microwave Processing and Solvent Extraction

Hydrometallurgical assessment of oxides of Nb, Ta, Th and U from Ethiopian tantalite ore

Fluoride-Free Processing of Columbite Concentrate for Selective Recovery of Niobium and Tantalum Oxides

Separation and isolation of tantalum and niobium from tantalite using solvent extraction and ion exchange

Green extraction of niobium and tantalum for Ethiopian kenticha ores by hydrometallurgy process: a review

Approaches for Extractive Hydrometallurgy of Niobium and Tantalum from Ethiopian Kenticha Ores

Extraction of Ta and Nb from a Coltan Bearing Ore by Means of Ammonium Bifluoride Fluorination and Sulfuric Acid Leaching

Hydrochloric Acid Leaching Approaches for Tantalum and Niobium Pentoxides Enrichment in 1st Tin Slag from Bangka Island

Other Oxides Pre-removed from Bangka Tin Slag to Produce a High Grade Tantalum and Niobium Oxides Concentrate

A fluoride-free liquid-liquid extraction process for the recovery and separation of niobium and tantalum from alkaline leach solutions

Non-fluoride dissolution of tantalum and niobium oxides and their separation using ion exchange