Abstract:This paper presents the findings of the research aimed at developing computer models to determine the operating conditions in electric power systems (EPSs) feeding DC and AC railway substations. The object of the research is an EPS with a predominant traction load whose high-voltage power lines are connected to transformer and converter substations with 3 kV and 27.5 kV traction networks. The supply network includes 110 kV and 220 kV power lines. The EPS operating parameters are calculated based on the decomposition of the system into alternating and direct current segments. Calculations are performed for the fundamental frequency and high harmonic frequencies. The modeling technique is universal and can be used to determine the operating parameters and power quality indices for any configuration of an EPS and various designs of traction networks. With this technique, one can solve numerous additional problems, such as calculating the processes of ice melting in traction networks and power lines, determining electromagnetic field strengths, and assessing the heating of power line wires and catenary suspensions. The results obtained show that the voltages on the current collectors are within acceptable limits for all AC and DC electric locomotives. The levels of asymmetry on the 110 and 220 kV tires of traction substations (TP) do not exceed the normally permissible values. The values of the asymmetry coefficients for DC TP are tenths of a percent. With an increase in the size of traffic and in post-emergency conditions caused by the disconnection of communication between one of the support substations and the EPS, the asymmetry indicators on the 220 kV buses of AC substations may exceed the permissible limits. Phase-controlled reactive power sources can be used to reduce them. The analysis of the results of the determination of non-sinusoidal modes allows us to formulate the conclusion that the values of harmonic distortion go beyond the normative limits. Passive and active filters of higher harmonics can be used to normalize them. Calculations of thermal modes of traction transformers show that the temperatures of the most heated points do not exceed acceptable values.

Improving the Energy Efficiency of a Traction Network and Electric Rolling Stock of Alternating Current with a 4qs-Converter

Power Flow Algorithm for Traction Power Supply System of Electric Railway Based on Locomotive and Network Coupling

Modeling and Evaluation of Common-Mode EMI Coupling Through Converter Chassis in Metro Traction System

Load Modeling of CRH3 Electric Multiple Unit Traction Drive System

Simulation Software for Crh2 and Crh3 Traction Driver Systems Based on Simulink and Vc

Multiresolution Models of DC Traction Power Supply Systems With Reversible Substations

Optimization Design of Electrified Railway Traction Substation and Installation of Capacity

Improving the Efficiency of the Electric Locomotive Drive with a Controllable Converter for Traction Motor Excitation

Improving the electric power quality in the networks adjacent to the railroad traction substations

Modeling and Simulation at Temporary Power-off State of EMU Traction Driver System

The Modeling and Simulation of DC Traction Power Supply Network for Urban Rail Transit Based on Simulink

Thermal Model of the Output Traction Converter of an Electric Locomotive with Induction Motors

High-speed Traction Power Supply System Modeling and the Simulation Analysis

Optimal Voltage Regulation and Power Sharing in Traction Power Systems with Reversible Converters

Improvement of the power grid system of the East Siberian Railway

Modeling the Operating Conditions of Electric Power Systems Feeding DC and AC Traction Substations

Digital-twin Based Power Supply System Modeling and Analysis for Urban Rail Transportation

Simulating Calculation of Traction Substation's Feeder Current Based on Traction Calculation

Theoretical Calculation and Simulation of the Current Distribution of Electrified Railway with AT Traction Power Supply

Multi-Application Strategy Based on Railway Static Power Conditioner with Energy Storage System

Accelerated Model of Static Power Converter for Co-Phase Traction Power System