Abstract:This paper presents the findings of the research aimed at developing computer models to determine the operating conditions in electric power systems (EPSs) feeding DC and AC railway substations. The object of the research is an EPS with a predominant traction load whose high-voltage power lines are connected to transformer and converter substations with 3 kV and 27.5 kV traction networks. The supply network includes 110 kV and 220 kV power lines. The EPS operating parameters are calculated based on the decomposition of the system into alternating and direct current segments. Calculations are performed for the fundamental frequency and high harmonic frequencies. The modeling technique is universal and can be used to determine the operating parameters and power quality indices for any configuration of an EPS and various designs of traction networks. With this technique, one can solve numerous additional problems, such as calculating the processes of ice melting in traction networks and power lines, determining electromagnetic field strengths, and assessing the heating of power line wires and catenary suspensions. The results obtained show that the voltages on the current collectors are within acceptable limits for all AC and DC electric locomotives. The levels of asymmetry on the 110 and 220 kV tires of traction substations (TP) do not exceed the normally permissible values. The values of the asymmetry coefficients for DC TP are tenths of a percent. With an increase in the size of traffic and in post-emergency conditions caused by the disconnection of communication between one of the support substations and the EPS, the asymmetry indicators on the 220 kV buses of AC substations may exceed the permissible limits. Phase-controlled reactive power sources can be used to reduce them. The analysis of the results of the determination of non-sinusoidal modes allows us to formulate the conclusion that the values of harmonic distortion go beyond the normative limits. Passive and active filters of higher harmonics can be used to normalize them. Calculations of thermal modes of traction transformers show that the temperatures of the most heated points do not exceed acceptable values.

Optimization Design of Electrified Railway Traction Substation and Installation of Capacity

Coordinated Emergency Load Shedding Control Optimization Algorithm for Economic Cost and Accident Assessment

Power Flow Algorithm for Traction Power Supply System of Electric Railway Based on Locomotive and Network Coupling

Multi-objective Optimization of Traction Substation Converter Characteristic and Train Timetable in Subway Systems

Multi-Application Strategy Based on Railway Static Power Conditioner with Energy Storage System

Integrated Optimization on Train Control and Timetable to Minimize Net Energy Consumption of Metro Lines

A Methodology for Power Dispatch Based on Traction Station Clusters in the Flexible Traction Power Supply System

Optimization of Substation Locating and Sizing Based on 0–1 Model

Improving the electric power quality in the networks adjacent to the railroad traction substations

Load Modeling of CRH3 Electric Multiple Unit Traction Drive System

Rail Potential Control with Train Diagram Optimization in Multitrain DC Traction Power System

Comprehensive Capacity Configuration of Railway Unified Power Quality Controller Aiming at Flexible Compensation for Traction Substation

Bicriterion Optimisation For Traction Substations In Mass Rapid Transit Systems Using Genetic Algorithm

An online energy optimization method for urban rail flexible traction power supply system based on spatiotemporal matching of train power

Timetable optimization for maximization of regenerative braking energy utilization in traction network of urban rail transit

Researches on the Optimization Model and Strategies Against Low Voltage in Power Distribution Network

Fine Tuning of On-Board Traction Converters for High-Speed Electric Multiple Units at Depot

Optimization of Metro Vehicle Speed Curve Based on Vehicle-Grid-Railway Coupling Model

Optimized Sizing and Scheduling of Hybrid Energy Storage Systems for High-Speed Railway Traction Substations

Modeling the Operating Conditions of Electric Power Systems Feeding DC and AC Traction Substations

An Asymmetrical Connection Balance Transformer-Based Hybrid Railway Power Conditioning System with Cost-Function Optimization