Abstract:Cellular concrete consists of cement, water, aggregate and air voids. Cellular concrete can have between 10% and 70% air, which results in a material that is lightweight but may compromise the compressive strength and durability properties. Although it has been shown in the literature that less connected air voids yield a lower reduction in compressive strength, few studies have reported a detailed characterization of the microstructure of cellular concrete. It is critical to understand the impact of the microstructure and its implications on the development of strength, elastic modulus and transport properties in order to fully benefit from the lightweight properties, and this is the focus of this paper. Thirteen batches of cellular concrete were designed, prepared and tested. The air content varied, ranging from 6% to 35%. Three different foaming agents were used, one of which was protein-based and the other two were synthetic. Fresh properties such as slump, plastic air content and plastic density were measure for each batch of concrete as well as other properties, including hardened density, compressive strength, static elastic modulus, sorptivity, hardened air void distribution and thermal resistance. Key outcomes revealed that cellular concrete has good potential to be used for lightweight structural applications owing to its evolution of mechanical properties, transport properties and thermal resistance, but it is very sensitive to the type of foaming agent that is used. Outcomes showed that the foaming agent type had a noticeable effect on the thermal resistance and sorptivity coefficient but less of an effect on the mechanical properties. This is significant because the type of foaming agent used will directly influence the applications for which cellular concrete can be used. For example, cellular concrete designed with foaming agent B, which yields the greatest capillary pore volume is least suited for outdoor applications where the concrete may be exposed to moisture and or ions.

Investigation on Mechanical Strength of Cellular Concrete in Presence of Silica Fume

Effect of silica fume and waste marble powder on the mechanical and durability properties of cellular concrete

Experimental investigation on the effect of coarse aggregate size and silica fume dosage to the fracture parameters of concrete

THE USE OF MICRO-SILICA TO IMPROVE THE COMPRESSIVE AND FLEXURAL STRENGTH OF CONCRETE

Experimental Investigation of Electrochemical Corrosion and Chloride Penetration of Concrete Incorporating Colloidal Nanosilica and Silica fume

Effect of Micro-Silica on Fresh and Hardened Properties of Self-Compacting Concrete Reinforced with Glass and Polyvinyl Alcohol Fibres

Efficiency of Supplementary Cementitious Materials and Natural Fiber on Mechanical Performance of Concrete

Strength and Durability Studies on Hybrid Fiber Reinforced High-Performance Concrete for Silica Fume Based Mineral Admixture

Investigation of the effect of silica fume and synthetic foam additive on cell structure in ultra-low density foam concrete

Synergistic Effects of Polypropylene Fibers and Silica Fume on Structural Lightweight Concrete: Analysis of Workability, Thermal Conductivity, and Strength Properties

Evaluation of mechanical properties of silica fume mixed with pervious concrete pavement

Effect of Silica Fume on Engineering Performance and Life Cycle Impact of Jute-Fibre-Reinforced Concrete

Development of Ductile and Durable High Strength Concrete (HSC) through Interactive Incorporation of Coir Waste and Silica Fume

Concrete Mix Strength and Permeability with Various Supplementary Cementitious Materials

Effect of Varying Steel Fiber Content on Strength and Permeability Characteristics of High Strength Concrete with Micro Silica

Effects of silica fume addition and water to cement ratio on the properties of high-strength concrete after exposure to high temperatures

Compressive, flexural and splitting strength of fly ash and silica fume concrete

INVESTIGATING THE EFFECT OF NANO SILICA ON THE MECHANICAL PROPERTIES OF HARDENED CEMENT PASTE

Investigation of self-compacting concrete utilizing different supplementary pozzolanic materials for cement replacement

Cellular concrete properties and the effect of synthetic and protein foaming agents

Experimental Research on Properties of High-Strength Foamed Concrete