Abstract:This paper introduced a new concrete composites made by quaternary binder by partially replacing ordinary Portland cement (OPC) with different percentages of supplementary cementitious materials (SCMs). The motivation is to reduce our dependency on OPC to reduce CO 2 emission and carbon foot print. As the main substitute for the OPC, siliceous fly ash was used (FA). Moreover, silica fume (SF) and nanosilica (nS) were also used. This study utilized the following contents of SCMs used: 5% of nS; 10% of SF; 0, 15, and 25% of FA. During examinations the main mechanical properties of concrete composites, i.e. compressive strength ( f cm ) and splitting tensile strength ( f ctm ) were assed. The brittleness of these materials was also analysed. Based on the conducted studies, it was found that concrete composite based on quaternary blended cements, of series Mix3, has shown the best results in terms of good strength parameters, whereas the worst mechanical parameters were characterized by concrete of series Mix4. On the other hand, concrete including only SF and nS (Mix2 series) were characterized by the greatest brittleness. It was observed that f cm of concrete composites for series Mix2, Mix3, and Mix4 increase of 41%, 48%, and 31% respectively compared with the concrete without additives, i.e. series Mix1. In addition, f ctm also increase of 39%, 47%, and 30%, respectively, for the three series mentioned above, compared with the control concrete. Concrete of series Mix3, with high mechanical properties and demonstrating the features of quasi-plastic material, i.e. having lower brittleness, can be used in concrete and reinforced concrete structures subjected mainly to dynamic and cyclic loads. Therefore, it can be used, in the construction of foundation structures for machines and other types of structures in which the above-mentioned loads are dominant.

Compressive, flexural and splitting strength of fly ash and silica fume concrete

Mechanical properties and brittleness of concrete made by combined fly ash, silica fume and nanosilica with ordinary Portland cement

Effects of Mineral Admixture on Properties of Young Concrete

Compressive strength, flexural strength, and durability of high-volume fly ash concrete

Long-term strength and durability performance of eco-friendly concrete with supplementary cementitious materials

Synergistic Effects of Silica Fume And Steel Slag And Steel Slag In Advanced Concrete Composites

MECHANICAL PROPERTIES OF HIGH PERFORMANCE CONCRETE MADE WITH HIGH CALCIUM HIGH SULFATE FLY ASH

Fresh, mechanical, sorptivity and rapid chloride permeability properties of self-compacting concrete with silica fume and fly ash

Concrete Mix Strength and Permeability with Various Supplementary Cementitious Materials

Strength characteristics of self-compacting concrete with alkali-activated fly ash

Experimental study on the mechanical behavior of concrete incorporating fly ash and marble powder waste

Improvement in Concrete Behavior with Fly Ash, Silica-Fume and Coconut Fibres

Study on Strength, Shrinkage and Creep of Concrete Containing Ultrafine Fly Ash Composites

Experimental Application of Mineral Admixtures in Lightweight Concrete with High Strength and Workability

The role of fly ash microsphere in the microstructure and macroscopic properties of high-strength concrete

Mechanical properties of silica fume concrete designed as per construction practice

Research on Improving Cementitious Material Properties by Adding FineFly Ash

Effect of Fly Ash Additive on Concrete Properties

Microstructure and Strength Development of Quaternary Blend High-Volume Fly Ash Concrete

Mechanical Properties of Green Structural Concrete with Ultrahigh-Volume Fly Ash

Observations of Supplementary Cementitious Materials Effects on The Performance of Concrete Foundation