Abstract:To essentially explore and quantitatively clarify the mesoscopic failure mechanism of deep weak interlayer zone (WIZ) induced by complex stress levels and stress paths (i.e., particle breakage and orientation, pore morphology, etc.), a semi-quantitative mesoscopic structural damage analysis methodology has been proposed, by involving SEM-MATLAB image processing technique with representative meso-structural parameters after sufficient analysis of basic geotechnical properties of WIZ. Results show that the natural WIZ exhibiting a flocculated structure could be characterized as a well-graded geotechnical material forming main clay minerals, in which most pores are intergranular, with the pore size distribution concentrated in 0.007–200 μm. Higher initial confining pressure and axial loading tend to intensify the particle breakage degree and particle size distribution characteristics of WIZ more than that of axial and circumferential unloading, in which the stress path II of axial pressure loading and confining pressure unloading under the initial confining pressure of 25 MPa is the most severe with average particle area reduced by 56% and particle Korcak fractal dimension increased by 36%. The broken particles undergoing a series of irreversible dislocation, tumbling and rotation under the action of shear and tensile stress, tend to orient in the direction of 0°–15°, in which particles in stress path IV aggregate in two directions of 0–15° and 60–90° due to the bidirectional unloading. The unloading stress path IV shows the most distinct directional orientation and orderliness, with particle anisotropy increased by 267% and directional probability entropy reduced by 13%. Particle breakage and orientation in WIZ are accompanied by obvious filling, expansion and propagation of the meso-pores and meso-cracks, in which stress path IV under lower confining pressure most affects the morphological complexity of pore and crack boundaries with the pore morphology fraction dimension increased by 13.5%. The quantitative theoretical correlation of macro-meso parameters has been established by the stepwise regression analysis of two most relevant and representative correlation indexes (i.e., Korcak fractal dimension and pore morphology fractal dimension) with the ultimate bearing strength of WIZ, which has been proved to have high fitting accuracy by comparing the regression results with the test measured values. The meso-structural damage mechanism of WIZ under stress paths II and IV could, respectively, match the failure law of structural stress-induced collapse in the spandrel and the plastic squeezing-out failure of WIZ on the high sidewall of underground excavations. Research could provide feasible ideas for the relationship between macroscopic failure and mesoscopic damage of WIZ, as well as the effective basis for the further discussion of macro-meso constitutive model establishment.

Experimental Study on the Damage Characteristics and Fracture Behaviour of Rock-like Materials with Weak Interlayer Zones

A Quantitative Strain Energy Indicator for Predicting the Failure of Laboratory-Scale Rock Samples: Application to Shale Rock

Study on mechanical and fracture characteristics of inclined weak-filled rough joint rock-like specimens

A New Perspective on the Semi-quantitative Meso-structural Failure Mechanism of Deep Weak Interlayer Zone Under Different Stress Paths

An Experimental Investigation on the Foliation Strike-Angle Effect of Layered Hard Rock under Engineering Triaxial Stress Path

An Insight into the Excavation-Induced Stress Paths on Mechanical Response of Weak Interlayer Zone in Underground Cavern Under High Geostress

Investigation of the mechanical behavior of rock-like material with two flaws subjected to biaxial compression

Study on Staged Damage Behaviors of Rock-like Materials with Different Brittleness Degrees Based on Multiple Parameters

Study on multi-scale damage and failure mechanism of rock fracture penetration: experimental and numerical analysis

Strain field evolution and crack coalescence mechanism of composite strength rock-like specimens with sawtooth interface

Mechanical properties and acoustic emission characteristics of two dissimilar layers of rock-like specimens with prefabricated parallel fissures

Experimental study on instability failure of rock mass with rough joints under one-side constraint compression

Damage characteristics of weak rocks with different dip angles during creep

Experimental mechanical strength and deformation characteristics of deep damaged–fractured rock

Fracture characterization of fractured rock bodies based on acoustic and optical characteristics

Investigation Into Deformation and Failure Characteristics of the Soft-Hard Interbedded Rock Mass Under Multiaxial Compression

Experimental Study on Mechanical Behavior, Fracture Characteristics, and Acoustic Emission Damage Characteristics of Sandstone Under Triaxial Multistage Stress Disturbance

Influence of Fissure Number on the Mechanical Properties of Layer-Crack Rock Models under Uniaxial Compression

Mechanical Behavior and Fracture Characteristics of Rock with Prefabricated Crack under Different Triaxial Stress Conditions

Experimental Study on Deformation Failure of Deep Rock Mass under High Stress Load

Experimental and numerical studies of brittle rock-like specimens with unfilled cross fissures under uniaxial compression