Abstract:Abstract Based on the dual equation of Hamilton system and Duhamel's integral, and the orthogonality of the deflection equations, the mechanical model of homogeneous rectangular thin plate rock mass was established. And the results showed that the effective vibration modes of thin plate granite with four sides fixed were the 1 st , 5 th and 6 th orders under uniform dynamic load, and their vibration frequencies were 310rad/s, 975rad/s and 1309rad/s respectively. Under sustained dynamic load, moreover, the change of the vibration state of the 1 st mode was the most sharp, and the positive and negative alternation of its amplitude was the most frequent in the whole period, which had the most obvious effect on the vibration of the thin plate rock mass. Based on the Fourier transform formula, the Fourier series expressions and waveforms of sustained dynamic loads which contained rectangular wave, triangular wave and impact wave were obtained. The vibration characteristics of thin plate rock mass under these three kinds of sustained dynamic loads, the dynamic distribution of deflection, stress and maximum shear stress, as well as the dynamic damage and failure modes were all obtained. The results showed that plate cracks occurred firstly in the middle of the four sides and these cracks would propagate rapidly along the boundary of the thin plate rock mass; and then, plate cracks occurred at the central of the thin plate and the main develop tendency of these cracks was outward along the long central axis, moreover, these cracks also tended to expand outward along the short side central axis. It could be concluded that the initial failure position of the thin plate rock mass could be determined by the 1 st effective mode, and the development direction and trend of the damage could be determined by 5 th and 6 th effective vibration modes; under sustained dynamic load, tensile-shear failure occurred at four sides and shear failure at four corners; The tensile failure occurred in the central area of the thin plate, which developed into a main crack along the central long axis and a secondary crack along the short central axis, forming an " O- 十 " fracture pattern.

Experimental Study and Numerical Simulation on Rock-Like Materials Containing Weak Layers and Holes

Dynamic Response and Failure Mechanism of Layered Thin Plate Rock Mass Under Sustained Dynamic Load

Cracking Behavior and Acoustic Emission Characteristics of Rock Containing a Single Preexisting Flaw

Study of Impact Dynamic Characteristics and Damage Morphology of Layered Rock Mass

Study on multi-scale damage and failure mechanism of rock fracture penetration: experimental and numerical analysis

A dynamic damage constitutive model and three-dimensional internal crack propagation of rock-like materials in bond-based peridynamic

Numerical Study of Mechanical Properties and Microcrack Evolution of Double-Layer Composite Rock Specimens with Fissures under Uniaxial Compression

Crack propagation mechanism in rock-like specimens containing intermittent flaws under shear loading

Investigation of Microcrack Propagation and Energy Evolution in Brittle Rocks Based on the Voronoi Model

Experimental study on mechanical properties of multi-layered rock mass and statistical damage constitutive model under hydraulic-mechanical coupling

Mechanical properties and acoustic emission characteristics of two dissimilar layers of rock-like specimens with prefabricated parallel fissures

Numerical simulation on the dynamic mechanical response and fracture mechanism of rocks containing a single hole

Fracture and Damage Evolution of Multiple-Fractured Rock-like Material Subjected to Compression

A novel damaged-based numerical manifold method to simulate the failure process of brittle rocks from damage evolution to crack initiation, propagation and coalescence

Experimental and numerical study on crack propagation and coalescence in rock-like materials under compression

Three-dimensional numerical simulation of factors affecting surface cracking in double-layer rock mass

Numerical simulation of micro crack evolution and failure modes of limestone under uniaxial multi-level cyclic loading

Simulation of Shear and Tensile Fractures Using Ductile Phase Field Modelling with the Calibration of P Wave Velocity Measurement and Moment Tensor Inversion

Stable Crack Propagation Model of Rock Based on Crack Strain

Stress corrosion and interaction behaviour of adjacent cracks in rock-like material under hydro-mechanical Coupling: An experimental and numerical study

Multiscale fracture characteristics and failure mechanism quantification method of cracked rock under true triaxial compression