Abstract:The attainment and maintenance of a low temperature environment is essential for aerospace cryogenic detectors to achieve their required performance. Developing cryocoolers with features of high efficiency, compact structure, and long lifetime is the main challenge for cryogenic detector cooling. In this paper, a high efficiency thermally-coupled two-stage Stirling type pulse tube cryocooler working at 35 K for HgCdTe long wave infrared detector cooling is designed and tested. The thermally-coupled type avoids gas distribution at cold side which minimizes the inter-stage influence. The whole cryocooler is driven by one linear compressor which enables compact structure. The influence of operation frequency and mean pressure is studied by numerical calculation and experiments to determine the optimum operation condition. Acoustic impedance characteristics of both stages and the whole cold finger are also analyzed by comparing performance of cryocooler with different frequency, mean pressure and structure dimensions. The distributions of acoustic power and phase angle are presented to study the relation between impedance characteristic and the cooling performance. Impedance match between compressor and cold finger is also discussed by analyzing the efficiency of the linear compressor and the performance of cryocooler with different pulse tubes. Under optimum impedance match and operation condition of a working frequency of 39.2 Hz and a mean pressure of 2.45 MPa, the cryocooler provides a cooling power of 1 W at 35.1 K with an input electrical power of 150 W, which indicates a relative Carnot efficiency of 5%. This is a rather high efficiency for developed Stirling type multi-stage pulse tube cryocooler working at 35 K with only inertance tubes as phase shifter. The development of this cryocooler lays a solid base for the further optimization to realize a competitive candidate for aerospace cooling requirements.

Modifications to the MIRI cryocooler design to provide significant lift in the 2K to 4K range

Advancing Cryogenic Electronic Cooling: A Case Study on Embedded Manifold Microchannels in Micromachined Joule-Thomson Coolers

Advanced ice lithography system using a micro-machined Joule-Thomson cooler

Essential Improvement of the JT Cryocooler Working at Liquid Helium Temperature for Space: Efficient and Lightweight

Development of cryogenic system for James Webb Space Telescope

Numerical Study on the Working Performance of a G-M Cryocooler with a Mechanically Driven Displacer

Model Optimization of Infrared Homogenization for Inertial Confinement Fusion Cryotargets

Temperature behavior of the 4K-class Joule Thomson cooler during the cool-down phase for space science missions

A Two-Stage Thermally-Coupled Pulse Tube Cryocooler Working at 35 K for Space Application

A critical review of precooled JT cryocoolers working at 4 K for space applications

A miniature Stirling cryocooler operating above 100 Hz down to liquid nitrogen temperature

The thermal performance model of a 105 mW@4.41 K 4 He Joule-Thomson cryocooler designed for space applications

Design and Performance of the Upgraded Mid-InfraRed Spectrometer and Imager (MIRSI) on the NASA Infrared Telescope Facility

Study on Cooling Capacity Characteristics of an Open-Cycle Joule-Thomson Cryocooler Working at Liquid Helium Temperature

Stirling cycle cryocooler exported vibration analysis

Experimental study of the operating parameters on the performance of a single-stage Stirling cryocooler cooling infrared sensor for space application

Thermo-adaptability of a 6 W@ 90 K space Stirling cryocooler

Thermal and exported vibration characterization of RICOR K508N cryocooler

Thermal and mechanical study of a parametrised cryostat model for optical characterisation of upcoming CMB experiments

Numerical and Experimental Study of VM Type Pulse Tube Cryocooler with Multi-Bypass Operating below 4 K