Abstract:Although bolted joints may appear simple and are easy to manipulate, they are challenging to model and analyze due to their complex structural patterns and statically indeterminate nature. Ensuring the structural integrity of these joints requires maintaining proper bolt preload and clamping force, which is crucial for preventing failures such as overload, excessive bearing stress, fatigue, and stripping caused by seizing or galling. Achieving the necessary clamping force involves carefully controlling the input tightening torque, which is divided into the pitch torque and the friction torques at the bolt or nut bearing surfaces and in the engaged threads. The resulting clamping force is critical for generating the required force within the bolt. However, the achieved bolt force depends on several factors, such as friction at the joint's contact surfaces, grip length, and the relative rotation between the bolt and nut during tightening. Friction at the contact surfaces, particularly beneath the bolt head or nut and between the threads, consumes a significant portion of the applied tightening torque—approximately 90%. This paper explores the three existing bolt internal pitch, bearing, and thread friction torques that are generated by the external applied torque in a bolted joint, as well as their contributions and variations throughout a loading cycle composed of three phases: tightening, settling, and untightening. An analytical model is developed to determine these torque components, and its results are compared with those obtained from finite element (FE) modeling and experimental testing from previous studies. Finally, this study examines the torque–tension relationship during bolt tightening, offering insights into the required accuracy of bolt and clamped member stiffness. The bolt samples used in this study include M12 × 1.75 and M36 × 4 hex bolts.

Torsional and compressive properties of bolted joint under forward-reverse tightening

Mechanical Behavior of Loose High-Strength Bolted Connections with Thin Sheet Steels

Test on shear behavior of less-tightened high-strength bolted connections

Influence of Interference Fit Size on Hole Deformation and Residual Stress in Hi-Lock Bolt Insertion

Effect of Interference Fit Size on Local Stress in Single Lap Bolted Joints

Research on the relationship between the tightening torque and the preload of composite bolted structures

Finite element analysis of bolted joints under torsional loads

An improved 3D model of composite bolted joints with detailed thread structure and progressive damage analysis of realistic tightening process

Tightening performance analysis of bolted connection considering non-parallel contact

Influences of Assembly Parameters on the Strength of Bolted Composite-Metal Joints under Tensile Loading

The Tightening and Untightening Modeling and Simulation of Bolted Joints

Member stiffnesses and interface contact characteristics of bolted joints

Analysis and determination of bolt tightening process factors for composite structures under multiple working conditions

Degradation and failure analysis of bolted joints under transverse loading

Effects of the joint surface considering asperity interaction on the bolted joint performance in the bolt tightening process

Experimental study on initial loss of tension in bolted joints

Three-dimensional finite element analysis of tightening and loosening mechanism of threaded fastener

Analysis of the Tightening Process and the Cyclic Stress Amplitude of Studs and Tap Bolts

Research on bolt pre-tightening and relaxation mechanism under transverse load

Analyses of Tightening Characteristics and Cyclic Stress Amplitude of Studs and Tap Bolts

Study on hysteresis and threaded fitting behavior of bolted joint with non-parallel bearing surface