Abstract:Indonesia has very abundant reserves of silica, but progressive studies on the deposition of this material are very few, resulting in limited applications of silica. This work refers to the purification of silica from quartz sand originated from Sukabumi, Indonesia to obtain high-purity silica, which can be applied as important raw materials for special purposes. The aim of our research is to improve low-grade silica from quartz sand by removing impurities, especially aluminum and iron removal, using sulfuric acid leaching. In order to achieve the aim, the effect of reaction time and sulfuric acid concentration on the leaching process was investigated. The effectiveness of sulfuric acid for the impurities removal was observed. The chemical composition of the samples before and after leaching was studied using X-ray fluorescence. The mineralogical analysis of the starting materials and the products was conducted using X-ray diffraction. Microstructure analysis was performed using a scanning electron microscope, and EDS test was used to show the element composition at different points. The experimental results show that the optimum condition of the leaching process occurs at a reaction time of 5 hours with a sulfuric acid concentration of 10 N. The silica levels increase from 93.702 % to 96.438 %. Aluminum and iron impurities reduced from 4.691 % to 2.712 % and from 0.641 % to 0.094 %, respectively. At this optimum point, sulfuric acid is very effective to remove aluminum and iron impurities up to 42 % and 85 %, respectively. The results of this research can be a very significant opportunity to increase the value added of quartz sand from Sukabumi, which can enhance the quality of low-grade silica to provide better raw materials for glass industries.

Dissolution of quartz sand in sodium hydroxide solution for producing amorphous precipitated silica

Chemical reduction of silica into silicon from extracted quartz sand using sodium hydroxide and hydrochloric acid solutions

Implementation of sulfuric acid leaching for aluminum and iron removal for improvement of low-grade silica from quartz sand of Sukabumi, Indonesia

SYNTHESIS OF NANO-SILICA FROM LOA KULU RICE HUSK USING THE SOL-GEL METHOD

Synthesis and Characterisation of Nano-silica Based on Pumice Using NaOH

Preparation of nano-silica powder from silica sand via sol-precipitation method

The effect of the temperature of heat treatment process and the concentration and duration of acid leaching on the size and crystallinity of nano-silica powders formed by the dissociation of natural diatom frustule

Silica precipitation from rice husk ash leachate: optimization and kinetic analysis

Preparation of highly dispersed nanosilica from rice husk by aprecipitation method combined with high pressure homogenization

Facile Extraction and Characterization of Silica Nanopowder from Marine National Park beach sand via Alkali Fusion Route

Purification of Diatomaceous Earth using Acid Leaching Process to Produce High Purity Silica for Solar-Grade Silicon

Activation Mechanism of Ammonium Fluoride in Facile Synthesis of Hydrated Silica Derived from Ferronickel Slag-Leaching Residue

Extraction of silica from natural deposits for the production of silicon in photovoltaic applications

Effect of Temperature and Method of Synthesis on Morphology and Phase Transition of Amorphous and Crystalline Nano Silica Extracted from Mission Grass (Pennisetum Polystachion)

Synthesis of Silica Xerogel from Geothermal Sludge by Ultrasonic Assisted Alkali Extraction-Acid Precipitation

Optimization of Amorphous Silica Nanoparticles Synthesis from Rice Straw Ash Using Design of Experiments Technique

SYNTHESIS AND CHARACTERIZATION OF PURE AMORPHOUS SILICON OXIDE FROM TREATED KAOLINITIC CLAY USING CHEMICAL EXTRACTION

Synthesis of silica particles through conventional sol-gel and sonochemistry methods and the effect of catalyst, water concentration and sample environment to the particle size

Hierarchical Structure of SiO2 by In Situ Modification Combining Quartz Sand and Methyltrimethoxysilane

Sustainable route for silica preparation from silica fume

Extraction and Physicochemical Characterization of Highly-pure Amorphous Silica Nanoparticles from Locally Available Dunes Sand