Abstract:Highly porous and hydrophobic silica aerogel is fabricated using fly ash and trona ore as the starting materials and the cost-effective ambient pressure drying technique. The optimal calcination parameters are determined as temperature of 850°C, holding time of 2h, and the trona ore/fly ash mass ratio of 1.4. The CO2 release mechanism during calcination is proposed and has been verified by the Thermogravimetric and Differential Scanning Calorimetry analysis (TG/DSC) and X-ray fluorescence (XRF) technique. The hydrogel is derived from reacting the calcination mixture with sulphuric acid solution, followed by filtration. The impurities can be effectively removed through water washing and solvent exchange processes. No ion exchange resin is used in this preparation method, and thus it is a safe, inexpensive and much more straightforward process. In order to minimize drying shrinkage, the hydrogel is first transformed into an alcogel by soaking in ethanol, after which the alcogel is surface modified with the hexane/ethanol/trimethylchlorosilane (hexane/ethanol/TMCS) mixture solution. It has been observed that the specific surface area, BJH desorption pore volume, and BJH desorption average pore diameter all first increase and then decrease so that reach to the maximum values once the heat treatment temperature approaches 500°C due to the oxidation of CH3 groups on the silica skeleton surface. The final product presents special characteristics including: (1) high thermal stability for maintaining hydrophobicity up to 476°C, (2) contact angle of the as-dried silica aerogel as high as 151°, (3) silica particle size of ca. 3–6nm, agreeing well with the model as reported, (4) and the 500°C heat treated sample possessing a large specific surface area of 856.2m2/g, a large pore volume of 2.92cm3/g, and a BJH desorption average pore diameter of 17.1nm. The proposed inexpensive approach produces silica aerogel with superior properties and is a scalable-manufacturing method for large-scale industrial production.

Synthesis of Silica Xerogel from Geothermal Sludge by Ultrasonic Assisted Alkali Extraction-Acid Precipitation

Synthesis of hydrophilic and hydrophobic xerogels with superior properties using sodium silicate

Sillica Gel-Amine from Geothermal Sludge

Preparation of silica xerogel with high silanol content from sodium silicate and its application as CO2 adsorbent

Sonochemical effect and pore structure tuning of silica xerogel by ultrasonic irradiation of semi-solid hydrogel

Synthesis of porous silica gel and study on the adsorption of cerium

Physicochemical Properties of Mesoporous Organo-Silica Xerogels Fabricated through Organo Catalyst

Synthesis and characterization of silica gel from Lapindo volcanic mud with ethanol as a cosolvent for desiccant applications

Effects of the synthesis hydrogel on the formation of zeolite LTA membranes

Development of porous silica production by hydrothermal method

Synthesis of high specific surface area silica aerogel from rice husk ash via ambient pressure drying

Synthesis of sodium silicate using industrial by-products glauber’s salt and microsilica: Effective reuse of the waste

Synthesis and Characterisation of Nano-silica Based on Pumice Using NaOH

Preparation of silica aerogel from rice hull ash by drying at atmospheric pressure

Fabrication of mesoporous silica nanoparticles by sol gel method followed various hydrothermal temperature

SYNTHESIS OF LARGE-PORT HIGH SILICA MOR ZEOLITE BY DRY GEL SELF TRANSFORMATION IN THE ABSENCE OF ORGANIC STRUCTURE-DIRECTING AGENTS

A novel low-cost method of silica aerogel fabrication using fly ash and trona ore with ambient pressure drying technique

Preparation of Silica Gels in Electrostatic Field

Silica aerogels formed from soluble silicates and methyl trimethoxysilane (MTMS) using CO2 gas as a gelation agent

Synthesis of high surface area mesoporous silica SBA-15 by adjusting hydrothermal treatment time and the amount of polyvinyl alcohol

SYNTHESIS OF NANO-SILICA FROM LOA KULU RICE HUSK USING THE SOL-GEL METHOD