Abstract:A new and promising approach to the reduction of greenhouse gas emissions is the use of improved lightweight constructions based on multi-material systems comprising sheet metal with local carbon fibre reinforced plastic (CFRP) reinforcements. The CFRP is used to reinforce highly stressed areas and can be aligned to specific load cases. The locally restricted application of CFRP means that the material costs can be effectively reduced by comparison to parts made entirely of CFRP on account of the expensive production process requiring the use of an autoclave. These parts are thus only used in high-priced products. The production of hybrid CFRP steel structures in a mass production process calls for an efficient production technology. Current research work within the scope of a collaborative research project running at the University of Paderborn is concentrating on the development of manufacturing processes for the efficient production of automotive structural components made up of sheet metal blanks with local CFRP patches. The project is focusing especially on basic research into the production of industrial components. The aim of the investigation is to create an efficient and controlled process for producing CFRP reinforced steel structures from semi-finished hybrid steel-CFRP material. This includes tool concepts and an appropriate process design to permit short process times. The basis of an efficient process design is an in-depth knowledge of the material behaviour, and hence a thorough characterisation was performed. Material parameters were determined for both simulation and forming. For this, monotonic tensile, shear and bending tests were conducted using both uncured prepregs and cured CFRP specimens. To achieve an accurate simulation of the forming process, a special material model for carbon fibre prepregs has been developed which also includes the anisotropic material behaviour resulting from fibre orientation, the viscoelastic behaviour caused by the matrix and the hardening effects that prevail during curing. Recent results show good qualitative agreement and will be presented in this paper. In order to control the properties of the hybrid components, four different tool concepts for the prepreg press technology have been developed and tested. The concepts are presented and the results of experimental investigations are discussed in this paper.

Development of innovative technologies for manufacturing of certified narrow body aircraft composite flap

Development of Mach Scale Rotors with Tailored Composite Coupling for Vibration Reduction

Manufacturing and Validation of a Novel Composite Component for Aircraft Main Landing Gear Bay

Corrugated composites: production-integrated quality assurance in carbon fiber reinforced thermoplastic sine wave beam production

CF Reinforced Thermoplastic Hybrid Process Proposal for the Optimization of Sandwich Panels Stiffness and Processability

Application of Liquid Composite Molding Technology on Aeronautics

Development and Manufacturing of a Fibre Reinforced Thermoplastic Composite Spar Produced by Oven Vacuum Bagging

Jig-less end-effector system for automating exhausting composite fuselage assembly tasks

Experimental investigation on 3D printed lightweight sandwich structures for energy absorption aerospace applications

Design and Qualification of an Additively Manufactured Manifold for Aircraft Landing Gears Applications

Optimization of prepreg compression molding process for production of structures with recycled carbon fibers

Thermosetting Composite Materials in Aerostructures

Experimental and numerical studies on two-point incremental forming of woven fabric composite sheet

Experimental analysis of repaired CFRP by innovative hot bonding technology

Experimental and numerical analysis of the consolidation process for additive manufactured continuous carbon fiber-reinforced polyamide 12 composites

Composite Cutting with Abrasive Water Jet

Manufacturing Processes for Combined Forming of Multi-Material Structures Consisting of Sheet Metal and Local CFRP Reinforcements

On the effect of printing orientation on the surface roughness of an additive manufactured composite vertical tail

Investigation of the resin infusion process and mechanical performance of carbon fiber reinforced plastic composites from recycled carbon fiber

A Critical Review on Fiber Metal Laminates (FML): From Manufacturing to Sustainable Processing

Manufacturing Technology of Lightweight Fiber-Reinforced Composite Structures in Aerospace: Current Situation and toward Intellectualization