Abstract:Fiber reinforced thermoplastic polymer composites have gained a lot of attention over the past two decades, due to their excellent mechanical performance and their lightweight resulting in lower CO2 emissions for airplanes and vehicles. However, with increased demand for these materials, research regarding environmentally friendly recycling routes has become a central environmental issue. Mechanical recycling by exploiting the melting properties of thermoplastic polymers has proven an excellent way of increasing the value of recycled composites, especially compared to other mainstream techniques. This research aims at investigating the relationship between the microstructure of these materials and their resulting mechanical properties. The studied material is processed by compression molding chopped woven composites chips, made from a polyamide 6 matrix reinforced with glass fibers. A novel microstructural investigation for these types of materials was conducted using multiple destructive and non-destructive techniques, along with tensile and flexural tests on specimens made from different chips sizes. This investigation revealed a hierarchical fiber structure with a mixture of intact woven chips and randomly oriented unidirectional fiber strands. This microstructure causes complex damage propagation mechanisms and variability in mechanical performance. This hinders development and large-scale commercialization of these materials and favors other less eco-friendly recycling strategies. Therefore, developing accurate predictive models for the mechanical response of these materials is important, thus enabling fast design optimization. A multi-scale predictive model is hence proposed based on extensive qualitative and quantitative microstructural investigation and is able to capture the anisotropy of the material. This approach is validated on experimental data from a recycled PA6/Glass fiber composite and can be applied for other recycled materials in the same manner.

Development and Manufacturing of a Fibre Reinforced Thermoplastic Composite Spar Produced by Oven Vacuum Bagging

Mechanical Strength and Surface Analysis of a Composite Made from Recycled Carbon Fibre Obtained via the Pyrolysis Process for Reuse in the Manufacture of New Composites

Novel Thermoplastic Composites Strengthened with Carbon Fiber-Reinforced Epoxy Composite Waste Rods: Development and Characterization

Environmental Impact of an Innovative Aeronautic Carbon Composite Manufactured via Heated Vacuum-Assisted Resin Transfer Molding

Experimental and numerical analysis of the consolidation process for additive manufactured continuous carbon fiber-reinforced polyamide 12 composites

Optimization of prepreg compression molding process for production of structures with recycled carbon fibers

A viable strategy to recycle post-used carbon fiber thermoset composites as a multi-functional filler for PP composites

Thermomechanical Assessment of Recovered PA12 Powders with Basalt Filler for Automotive Components

Manufacturing and Flexural Characterization of Infusion-Reacted Thermoplastic Wind Turbine Blade Subcomponents

Mechanical recycling process: An alternative for a viable disposal of carbon fiber‐reinforced thermoplastic waste

Carbon-Fiber-Recycling Strategies: A Secondary Waste Stream Used for PA6,6 Thermoplastic Composite Applications

Design, Manufacturing, and Evaluation of Race and Automotive Prototypal Components Fabricated with Modified Carbon Fibres and Resin

Resource-efficient manufacturing process of composite materials: Fibrillation of recycled textiles and compounding with thermoplastic polymer

Reproducibility Study of the Thermoplastic Resin Transfer Molding Process for Glass Fiber Reinforced Polyamide 6 Composites

Designing of carbon fiber-reinforced polymer (CFRP) composites for a second-life in the aeronautic industry: strategies towards a more sustainable future

Thermomechanical characterisation of reprocessable, siloxane-based, glass-fibre-reinforced vitrimers

Manufacture of Green-Composite Sandwich Structures with Basalt Fiber and Bioepoxy Resin

Investigation of the resin infusion process and mechanical performance of carbon fiber reinforced plastic composites from recycled carbon fiber

Experimental and multi-scale investigation of the mechanical behavior of mechanically recycled glass fiber reinforced thermoplastic composites

Additive manufacturing of continuous fibre reinforced thermoplastic composites using fused deposition modelling: Effect of process parameters on mechanical properties

Experimental and numerical studies on two-point incremental forming of woven fabric composite sheet