Abstract:Recent advances in additive manufacturing technologies have already led to the wide-scale adoption of 3D-printed parts in the aerospace, medical, automotive, tooling, and electronics industries. The expansion in choice of materials that can be processed, in particular, using fused deposition modeling (FDM), selective laser sintering/melting, and stereolithography, and the steady advancements in dimensional accuracy control, have extended the range of applications beyond rapid prototyping. However, additive manufacturing still has considerable limitations compared to traditional and subtractive manufacturing processes. This work addresses limitations associated with the as-deposited surface roughness of 3D-printed parts. The effects of roughness-induced stress concentrations on the mechanical strength were studied, and ultrafast laser postprocessing was utilized to reduce the surface roughness of 3D-printed parts. The samples were manufactured using a commercial desktop FDM system and standard ASTM flat dogbone geometries. The samples were then postprocessed with a high-repetition-rate ultrafast Yb-fiber laser using a multi-layer scan approach. This novel postprocessing method enables high-efficiency material removal without inducing excessive thermal residual stresses into the material and, therefore, is suitable for postprocessing thermally sensitive materials, such as PLA and other polymers as well as parts with engineered porosity. In this work, we vary laser process parameters, such as average power and number of laser-processed layers, to achieve various levels of surface roughness. Values of tensile strength of the specimens were compared between 3D-printed samples featuring initial roughness and laser postprocessed samples with different values of surface roughness. The results indicate that the laser-processed samples exhibit an almost 10% increase in tensile strength depending on specific laser processing parameters.

On the effect of printing orientation on the surface roughness of an additive manufactured composite vertical tail

An innovative approach to a UAV tails structural design for additive manufacturing

Additive Manufacturing of 17-4PH Alloy: Tailoring the Printing Orientation for Enhanced Aerospace Application Performance

Tailoring surface roughness through the temporal variation of additive manufacturing process parameters

Abrasive flow finishing of 3D-Printed Aerofoils: Design, numerical Simulation, and experimental analysis

Optimize Process Parameter of FDM Techniques to Improve Mechanical Properties of Aerospace Application

Design and Qualification of an Additively Manufactured Manifold for Aircraft Landing Gears Applications

Surface topology modification using 3D printing techniques to enhance the interfacial bonding strength between polymer substrates and prepreg carbon fibre-reinforced polymers

Experimental investigation on 3D printed lightweight sandwich structures for energy absorption aerospace applications

Integrating 3D printing of polymer matrix composites and metal additive layer manufacturing: surface metallization of 3D printed composite panels through cold spray deposition of aluminium particles

Combination of topology and shape optimization with finite element modeling in the case of an aerospace component produced by laser based additive manufacturing

Analyzing Surface Roughness Variations in Material Extrusion Additive Manufacturing of Nylon Carbon Fiber Composites

Enhancing the interfacial bonding strength between 3D-printed aluminium substrates and carbon fibre–reinforced polymers

Optimization of printing parameters in fused deposition modeling for improving part quality and process sustainability

Fused Filament Fabrication of Short Glass Fiber-Reinforced Polylactic Acid Composites: Infill Density Influence on Mechanical and Thermal Properties

Utilizing ultrafast lasers for postprocessing to improve mechanical properties of 3D-printed parts

Metal additive manufacturing in the commercial aviation industry: A review

Additive Manufacturing Redesigning of Metallic Parts for High Precision Machines

The effect of process parameters on geometric deviations in 3D printing with fused deposition modelling

Additive manufacturing of metal-polymer hybrid parts: the influence of as-printed LPBF surface roughness on the joint strength

Validation of the Mechanical Behavior of an Aeronautical Fixing Turret Produced by a Design for Additive Manufacturing (DfAM)