Abstract:The benefits that additive manufacturing (AM) offers to the industry are generally well understood and appreciated. However, the current design for additive manufacturing (DfAM) methodologies and computer-aided manufacturing (CAM) packages neglect to exploit the full potential that AM can offer through its unique ability to vary material characteristics whilst the final component geometry is being formed. The purpose of this research is to demonstrate that additional design control can be gained through temporal DfAM (TDfAM). In this study, the ability to tailor the surface roughness of fused deposition modelling (FDM) AM polylactic acid (PLA) parts through the variation of two process parameters, nozzle temperature and print speed, is explored. The underpinning hypothesis is that variation of temperature and printing speed, can provide a significant change of surface roughness within one homogeneous part. This research demonstrated that nozzle temperature and print speed have a statistically significant effect on the surface roughness of the top and side surfaces. By increasing temperature and speed, the roughness of the side surfaces decreased and the roughness of the top surface increased. Furthermore, the in-silico implementation of TDfAM is demonstrated. As such, the research supports the hypothesis that TDfAM can enable additional control over the surface characteristics of a homogeneous part.

What problem does this paper attempt to address?

### Problems the paper attempts to solve The paper aims to customize surface roughness by exploring the temporal variation of parameters in the additive manufacturing (AM) process. Specifically, it investigates how to significantly change the surface roughness in a single homogeneous part by changing the nozzle temperature and printing speed in the fused deposition modeling (FDM) process. The main hypothesis of the study is that by changing the temperature and printing speed, different surface roughness can be achieved at different locations of the same part. ### Research background Additive manufacturing technology has broad application prospects in industry, such as the conversion directly from design to finished product and the generation of highly customized parts without additional tool costs. These advantages have had an important impact in many fields from aerospace to biomedical technology. However, current design methods and computer - aided manufacturing (CAM) software have not fully utilized the unique ability of additive manufacturing, that is, changing material properties simultaneously during the formation of the final part geometry. ### Research purpose The purpose of this paper is to show that more design control can be obtained through temporal design (TDfAM). Specifically, the study explores the customization ability of the surface roughness of polylactic acid (PLA) parts in the FDM process by changing the nozzle temperature and printing speed. The study hypothesizes that by changing the temperature and printing speed, significant changes in surface roughness can be achieved at different locations of the same part. ### Main findings 1. **The influence of nozzle temperature on surface roughness**: - For the side surface, as the temperature increases, the surface roughness decreases. - For the top surface, as the temperature increases, the surface roughness increases. 2. **The influence of printing speed on surface roughness**: - For the side surface, as the printing speed increases, the surface roughness decreases. - For the top surface, there is no obvious trend in the change of printing speed, but the slowest printing speed (30 mm/s) produces a surface roughness significantly lower than other speeds. 3. **The change of sample quality**: - As the nozzle temperature increases, the sample quality increases. - As the printing speed increases, the sample quality decreases. ### Conclusion The research results support that additional control of the surface properties of homogeneous parts can be achieved through temporal design (TDfAM). This provides a new dimension for future design, enabling designers to dynamically adjust process parameters during the manufacturing process, thereby obtaining more precise control of material properties. This finding is of great significance for applications that require specific surface roughness, such as biomedical implants.

Tailoring surface roughness through the temporal variation of additive manufacturing process parameters

Analyzing Surface Roughness Variations in Material Extrusion Additive Manufacturing of Nylon Carbon Fiber Composites

Optimizing FDM process parameters: predictive insights through taguchi, regression, and neural networks

Quantitative Analysis of Surface Profile in Fused Deposition Modelling

Interfacial Bonding During Multi-Material Fused Deposition Modeling (FDM) Process Due to Inter-Molecular Diffusion

Optimization of printing parameters in fused deposition modeling for improving part quality and process sustainability

Optimize Process Parameter of FDM Techniques to Improve Mechanical Properties of Aerospace Application

Experimental study and optimizing the FDM process using war strategy optimization technique to enhance mechanical properties and surface quality of the PLA thermoplastic

Characterization of Surface Topography Features for the Effect of Process Parameters and Their Correlation to Quality Monitoring in Metal Additive Manufacturing

Parametric Optimization of FDM Process for PA12-CF Parts Using Integrated Response Surface Methodology, Grey Relational Analysis, and Grey Wolf Optimization

Enhanced Surface Quality and Strength of FDMed Specimens Using BBD and Bio-Inspired Algorithms

Investigation on FDM process parameters for the dimensional accuracy with ABS polymer part

Improving surface roughness of polylactic acid (PLA) products manufactured by 3D printing using a novel slurry impact technique

Abrasive flow finishing of 3D-Printed Aerofoils: Design, numerical Simulation, and experimental analysis

Statistical analysis and multi-criteria optimization of fused deposition additive manufacturing process for acrylic butadiene styrene parts

On the effect of printing orientation on the surface roughness of an additive manufactured composite vertical tail

Effect of process parameters on flexural strength and surface roughness in fused deposition modeling of PC-ABS material

Tailoring mechanical properties of FDM-3D-printed parts through titanium dioxide-reinforced resin filling technique

Impact of processing defects on microstructure, surface quality, and tribological performance in 3D printed polymers

Studying the effects of FDM process parameters on the mechanical properties of parts produced from PLA using response surface methodology

Effect of process parameters on additively manufactured parts using FDM process & material selection: A review