Abstract:The Microarc Oxidation (MAO) layer on titanium alloy was mainly composed of TiO2, and there were some defects, such as holes and cracks, which made the performance of the MAO layer not ideal. To enhance the properties of the MAO layer, titanium carbide (TiC) particles were added to the electrolyte of a phosphate–silicate system as an additive. Consequently, the MAO layers containing the TiC phase on Ti6Al4V alloy were produced. The MAO process, composition, microstructure, and hardness of the MAO layer were comprehensively analyzed. Their frictional performance was assessed under reciprocating friction conditions without lubrication. The findings suggested that added TiC particles in the electrolyte played a significant role in creating the MAO layer, enhancing its thickness. The electrolyte without TiC particles produced an MAO layer primarily composed of TiO2 in two different mineral forms (rutile and anatase). Adding TiC particles resulted in the presence of TiC within the MAO layer, thereby facilitating the formation of a reinforced oxide layer. This addition also led to an improvement in the densification of the layer and a reduction in porosity. Notably, corrosion resistance testing indicated that incorporating 6 g/L TiC into the electrolyte resulted in superior performance compared with that obtained from the base electrolyte alone by achieving 1.4 times higher corrosion resistance. Moreover, a hardness value of 690 HV for the MAO layer was attained at a content level of 9 g/L TiC, demonstrating a significant 65% enhancement compared to the base oxide layer. This finding also demonstrated significantly enhanced friction property with a wear-volume reduction to 0.81 mm3. The findings on the relationship between the preparation of the MAO layer and its structure and properties can provide valuable guidance for designing and preparing the MAO layer.

Study on friction characteristics of micro-arc oxidation modification layer of titanium alloy surface in seawater environment

Effect of Oxidation Time on the Structure and Properties of Ti-25Nb-3Zr-2Sn-3Mo Titanium Alloy Microarc Oxide Film Layer

Experimental Study on Friction Characteristics of Micro-Arc Oxidation Modified Layer on Titanium Alloy Surface

Surface tribological and electrochemical properties of TiAlSiN coating in seawater

Effects of Micro-arc Oxidation/Multi-arc Ion Plating Composite Treatment on Microstructure and Properties of TC4 Titanium Alloy

Friction and wear behavior of micro‐arc oxidation‐modified graphene/epoxy resin composite coating on TC4 titanium alloyReibungs‐ und Verschleißverhalten einer durch Mikro‐Lichtbogen‐Oxidation modifizierten Graphen/Epoxidharz‐Verbundbeschichtung auf einer TC4‐Titanlegierung

Tribological Behavior of Microarc Oxidation Coatings Formed on Titanium Alloys Against Steel in Dry and Solid Lubrication Sliding

Preparation and Study on Fretting Tribological Behavior of Composite Lubrication Structure on the Titanium Alloy Surface

Preparation of Microstructure Laser Ablation and Multiple Acid-Etching Composites on the Surfaces of Medical Titanium Alloy TC4 by Laser Ablation and Multiple Acid-Etching, and Study of Frictional Properties of the Processed Surfaces

Influence of surface structure/wettability on tribological properties of titanium

Investigations on femtosecond laser-induced surface modification and periodic micropatterning with anti-friction properties on Ti6Al4V titanium alloy

Improvement of tribological performance by micro-arc oxidation treatment on selective laser melting Ti6Al4V alloy

Growth characteristics and wear properties of micro-arc oxidation coating on Ti-6Al-4V with different laser texture shapes

Comparative Investigation on the Tribocorrosion Resistance of Ti6Al4V and 60NiTi Alloys in Simulated Seawater Environment

EFFECT OF MICRO-TEXTURES AND CrAlSiN COATINGS ON THE FRICTION AND WEAR PROPERTIES OF 316L STAINLESS STEELS IN SEAWATER

Influence of titanium carbide particles on the characteristics of microarc oxidation layer on Ti6Al4V alloy

Influence of Thermal Oxidation Duration on the Microstructure and Fretting Wear Behavior of Ti6Al4V Alloy

Study on the structure and corrosion resistance of micro-arc oxidation coatings on TA10 titanium alloy with different graphite additions

Study on Preparation of Micro-Arc Oxidation Film on TC4 Alloy with Titanium Dioxide Colloid in Electrolyte

Effect of Surface Micro-Hardness Change in Multistep Machining on Friction and Wear Characteristics of Titanium Alloy

A comparative analysis of different surface tribological and electrochemical properties of TiAlN, TiAlSiN, and CrAlN thin film coatings in seawater