Abstract:This work focuses on continuously operated spray granulation processes in horizontal fluidized beds highlighting the influence of process conditions on the particle properties of the resulting product granules. The drying process has a decisive influence on the kinetics of the growth rate and thus also on the properties of the particles, such as the morphological structure, particle moisture content and porosity as well as density, compression strength and the wetting behavior. This influence has been considered in this study in more detail on the basis of the model material sodium benzoate. In order to compare the produced granules at different drying conditions and spray rates of the suspension an external product classification was used to achieve a certain product granule size. The obtained experimental results show a deep influence of the thermal conditions onto granule morphology and structural properties, which is in qualitative agreement with recent experimental observations (Rieck et al., 2015; Hoffmann et al., 2015a; Schmidt et al., 2017b). The overall trend of the results reveal smoother product granules with decreasing spray rates of the suspension and increasing drying temperatures. These smoother surface morphologies lead to a more homogeneous layering which has as a consequence that the internal particle porosity is decreasing while the solids density and the compression strength of the particles are increasing at the same time. In this study the purely qualitative classification of the surface texture from previous experimental studies was extended by the topographic analysis of the product granules, giving the possibility to quantify the morphological structure by means of roughness measurements. This makes the morphological design accessible as product property and permits the utilization of models that describe the morphology according to the process conditions.

Parallel compensator for zero dynamics stabilization in fluidized bed spray granulation

Control induced instabilities in fluidized bed spray granulation

Adaptive discrepancy based control of continuous fluidized bed spray granulation with external sieve-mill cycle

Control of Multi-Chamber Continuous Fluidized Bed Spray Granulation

Non-identifier-based adaptive control of continuous fluidized bed spray granulation

Koopman-based data-driven control for continuous fluidized bed spray granulation with screen-mill-cycle

Koopman-based data-driven control for continuous fluidized bed spray granulation

Online parameter identification for continuous fluidized bed spray granulation with external sieve-mill cycle

Influence of separation properties and processing strategies on product characteristics in continuous fluidized bed spray granulation

Dynamic and Steady-State Characterization of the Liquid Spray Zone in an Externally Heated Gas–Solid Fluidized Bed

Stability of Combined Continuous Granulation and Agglomeration Processes in a Fluidized Bed with Sieve-Mill-Recycle

Modeling and Control of the Pneumatic Constant Pressure System for Zero Gravity Simulation

Inferential control of product properties for fluidized bed spray granulation layering

Control of segregation by non-uniform aeration in a fluidized bed spray granulator

Application of Near-Infrared Spectroscopy Combined with Design of Experiments for Process Development of the Pulsed Spray Fluid Bed Granulation Process

Product-Property Guided Scale-Up of a Fluidized Bed Spray Granulation Process Using the CFD-DEM Method

Application of Definitive Screening Design to Quantify the Effects of Process Parameters on Key Granule Characteristics and Optimize Operating Parameters in Pulsed-Spray Fluid-Bed Granulation

Influence of process conditions on the product properties in a continuous fluidized bed spray granulation process

Hybrid model development and nonlinear model predictive control implementation for continuous dry granulation process

Continuous wet granulation using fluidized-bed techniques I. Examination of powder mixing kinetics and preliminary granulation experiments

Mechanistic understanding of the effects of process and design parameters on the mixing dynamics in continuous twin-screw granulation