Abstract:The boundaries of a target product quality profile of certain failure modes can be exploited to construct the operation window, a process design space (PDS), for the granulation process. The purpose of this study is to implement process design and development for the pulsed spray fluid bed granulation (PSFBG) on a laboratory-scale granulator. This work consists of three parts: (1) implementation of Process Analytical Technology (PAT) combined with multivariate data analysis to monitor the formulation characteristics including moisture content, particle size and granule yield; (2) adoption of a new design of experiments (DoE) method Definitive Screening Design (DSD), with the well-established PAT monitoring tools, to investigate the process response to the intended changes in the critical process parameters (CPPs); and finally, (3) the definition of a PDS for the PSFBG, within which the acceptable performance of the process is guaranteed. The effects of the process parameters (i.e., the inlet air temperature, inlet air relative humidity, binder spray rate, atomization pressure, pulse cycle and pulse width) on granule size were evaluated. Two different failure modes were identified based on the measured target product quality (granule size) profile: risk of bed collapse due to over-wetting and low granulating efficiency. Using the constructed PDS for desired granulation, the expected final granule attributes can be obtained through properly controlling the process trajectory by adjusting the process parameters.

Non-identifier-based adaptive control of continuous fluidized bed spray granulation

Adaptive discrepancy based control of continuous fluidized bed spray granulation with external sieve-mill cycle

Control induced instabilities in fluidized bed spray granulation

Control of Multi-Chamber Continuous Fluidized Bed Spray Granulation

Koopman-based data-driven control for continuous fluidized bed spray granulation

Parallel compensator for zero dynamics stabilization in fluidized bed spray granulation

Koopman-based data-driven control for continuous fluidized bed spray granulation with screen-mill-cycle

Inferential control of product properties for fluidized bed spray granulation layering

Immersion and Invariance Adaptive Control of Nonlinearly Parameterized Nonlinear Systems

Online parameter identification for continuous fluidized bed spray granulation with external sieve-mill cycle

Objective-oriented Genetic Algorithm Based Dynamical Sliding Mode Control for Slurry Level and Air Pressure in Shield Tunneling

Adaptive Robust Control Of Variable Displacement Pumps

Nonlinear Control of Long-pipe Valve-controlled Asymmetrical Cylinder System

Dynamic and Steady-State Characterization of the Liquid Spray Zone in an Externally Heated Gas–Solid Fluidized Bed

Influence of separation properties and processing strategies on product characteristics in continuous fluidized bed spray granulation

Adaptive nonlinear model predictive control for a class of multivariable chemical processes

Immersion and Invariance Adaptive Control of a Class of Continuous Stirred Tank Reactors

Nonlinear dynamic behaviors and control based on simulation of high-purity heat integrated air separation column.

Control of segregation by non-uniform aeration in a fluidized bed spray granulator

Stability of Combined Continuous Granulation and Agglomeration Processes in a Fluidized Bed with Sieve-Mill-Recycle

Application of Near-Infrared Spectroscopy Combined with Design of Experiments for Process Development of the Pulsed Spray Fluid Bed Granulation Process