Abstract:Many applications with potential use of high entropy alloys (HEAs) involve thermo-mechanical processing. The principal aim of this study is to elucidate the deformation mechanisms of the as-cast AlCoCrFeNi 2.1 eutectic high entropy alloy (EHEA) at elevated temperatures. This investigation involves considering the interplay between phase transformations affecting microstructural evolutions and restoration mechanisms, which will be correlated with flow behavior. This correlation is investigated using in-depth characterization techniques coupled with flow curve analysis. The as-solidified microstructure consists of five phases, with disordered FCC and B2 phases dominating. Thermo-mechanical processing at elevated temperatures leads to the transformation of primary L1 2 precipitates into B2 precipitates. At high temperatures, unexpected deformation twinning occurs as a result of stress concentration caused by the B2 precipitates and Al depletion of the FCC matrix. In addition, the B2 precipitates promote strain accommodation within the FCC dendritic regions, leading to dendrite fragmentation and subsequent dynamic recrystallization (DRX) at 800 °C through continuous dynamic recrystallization (CDRX). Additionally, by increasing the deformation temperature to 1000 °C, DRX was suppressed, while dynamic recovery (DRV) was favored. This can be attributed to the dynamic dissolution of the disordered BCC and sigma (σ) phases, along with the dynamic transformation of the primary L1 2 precipitates, which effectively diminished the driving force of DRX.

Structural Transformations in Medium- and High-Entropy Alloy Systems in Course of High-Energy Ball Milling

Amorphization in the AlC System by Mechanical Alloying

Effect of Milling Time on the Structure Stability of FeMnNiCrAl Non-equiatomic High-Entropy Alloy

Structural changes during high-energy ball milling of iron-based amorphous alloys: Is high-energy ball milling equivalent to a thermal process?

Microstructure, deformation behavior, and dynamic recrystallization kinetics of FeNiMnCu-based high entropy alloys prepared by mechanical alloying and spark plasma sintering

Properties of High-Entropy Fe30Co20Ni20Mn20Al10 Alloy Produced by High-Energy Ball Milling

Microstructural evolution of CrCuFeNiZn nanocrystalline high entropy alloy prepared by mechanical alloying

Modifying Transformation Pathways in High Entropy Alloys or Complex Concentrated Alloys Via Thermo-Mechanical Processing

Structural evolution during mechanical milling and subsequent annealing of Cu–Ni–Al–Co–Cr–Fe–Ti alloys

THERMODYNAMICAL ANALYSIS ON THE METASTABLE TRANSITIONS OF A MULTI-PHASE Al3Ti-BASED INTERMETALLIC COMPOUND DURING HIGH-ENERGY BALL-MILLING

Comparative study of the microstructure and phase evolution of FeCoCrNiAl high-entropy alloy-matrix WC nanocomposite powders prepared by mechanical alloying

Microstructure characterization and phase evolution of equiatomic AlCoMoFeNi high entropy alloy synthesized by mechanical alloying

Phase Transformation and Morphology Evolution of Ti50Cu25Ni20Sn5 during Mechanical Milling

Microstructure evolution and mechanical properties of CoCrFeNiAl0.3 high entropy alloy produced by ball milling in combination with thermomechanical consolidation

Unleashing the microstructural evolutions during hot deformation of as-cast AlCoCrFeNi 2.1 eutectic high entropy alloy

Unusual phase transformation and novel hardening mechanisms upon impact loading in a medium entropy alloy with dual heterogeneous structure

Metastable transformation and reordering of mult-phase Al3Ti-based intermetallics

On the martensitic transformation in Fe$_{x}$Mn$_{80-x}$Co$_{10}$Cr$_{10}$ high-entropy alloy

Amorphization of Equimolar Alloys with HCP Elements During Mechanical Alloying

Effect of Milling Parameters on the Development of a Nanostructured FCC–TiNb15Mn Alloy via High-Energy Ball Milling

Structural and thermal properties of the Fe-based alloys prepared by mechanical milling