Abstract:Highly efficient and stable adsorbents play a crucial role in the adsorption treatment for CO2 capture. Lignin-derived porous carbons have gained increasing attention for CO2 adsorption application due to their abundant and cost-effective raw material sources. This study involves the synthesis of a series of porous carbons derived from sodium lignosulphonate using chemical activation and template methods. It was found that synthesis methods had significant influence on the properties of the obtained porous carbons, including texture structures and surface functional groups. The pore structure of the carbons obtained through the activation methods primarily consisted of etched channels, while that of the carbons acquired via the template methods predominantly originated from stacked sheet carbon. In comparison to the carbon samples obtained from template methods, chemically-activated porous carbons exhibited higher specific surface areas (1125 m2/g for the ZnCl2-activated sample and 1998.4 m2/g for the KOH-activated sample) and more micropores. The variations in the characteristics of the carbon samples derived from lignin with different synthesis methods also affected their CO2 adsorption performance. The CO2 adsorption capability of the chemically-activated porous carbons indicated their superior suitability for CO2 adsorption due to their higher specific surface area and abundant sulfur- and oxygen-containing functional groups. Notably, the porous carbons prepared with ZnCl2 as the activation agent (C-LS-ZnCl2) exhibited the most remarkable adsorption capacity of 4.45 mmol/g at 273 K and 100 kPa, and high CO2/N2 selectivity. The adsorption-desorption cycles confirmed the remarkable stability and regeneration ability of C-LS-ZnCl2. This study findings suggest that the utilization of the ZnCl2 activation method exhibits significant potential in transforming industrial lignin waste (sodium lignosulphonate) into a suitable adsorbent for CO2 adsorption.

High porous carbon nanofiber derived from lignosulfonate material

Effects of Various Surfactants on Alkali Lignin Electrospinning Ability and Spun Fibers

Efficient centrifugal spinning of soda lignin for the production of activated carbon nanofibers with highly porous structure

Electrospun Lignin Carbon Nanofiber Membranes with Large Pores for Highly Efficient Adsorptive Water Treatment Applications

Promoting Electrospun Lignin/PEO Nanofiber for High-Performance CO Filtration

Preparation and Characterization of Highly Porous Polyacrylonitrile Electrospun Nanofibers Using Lignin as Soft Template via Selective Chemical Dissolution Technique

Highly conductive and porous lignin-derived carbon fibers

High-performance electrospun carbon fiber derived from lignin and metal composite

Sodium-lignosulfonate derived activated carbon: an investigation into the role of NaOH in the activation mechanism

High-Yield Production of Lignin-Derived Functional Carbon Nanosheet for Dye Adsorption

Structure and properties of lignin based carbon nanofibers

Preparation of Biodegradable and Low-Cost Lignin-Based PVOH Carbon Fibers Prepared by Electrospinning

Production of carbon nanofibers from PAN and lignin by solution blow spinning

Activation of electrospun lignin-based carbon fibers and their performance as self-standing supercapacitor electrodes

Investigation on spinnability of low molecular weight alkaline lignin to fabricate biobased carbon fiber

Developing self-activated lignosulfonate-based porous carbon material for ethylene adsorption

Lignin-Derived Porous Carbons for Efficient Co2 Adsorption

Conversion of Lignin-Nanofibers to CNFs

Upscaling of lignin precursor melt spinning by bicomponent spinning and its use for carbon fibre production

A Feasible Way To Produce Carbon Nanofiber By Electrospinning From Sugarcane Bagasse

Porous Core-Shell Carbon Fibers Derived from Lignin and Cellulose Nanofibrils