Abstract:Composite filaments comprised of lignin and cellulose nanofibers (CNFs) were fabricated by a microfluidic spinning technique together with in situ interfacial complexation. The hierarchical assembly of well-ordered lignin/CNFs cross-linked using chitosan by ionic bonds resulted in the high orientation degree and compact microstructure of the filament, which was a promising precursor of carbon fibers. After stabilization and carbonization, bio-based carbon fibers with fine graphite microcrystals were obtained and carbon lattice was highly oriented along the fiber direction, contributing to the superior macro-performance. When the content of lignin was 75 wt %, the tensile strength and electrical conductivity of the carbon fibers reached 1648 MPa and 185.3 S/cm, respectively, surpassing the most reported values in the literature. Furthermore, a combined TG-FTIR approach was applied to further analyze the carbonization process of lignin/CNF precursors. The excellent mechanical and electrical performance of the bio-based carbon fibers would broaden their applications as a reinforcing agent and an electrical device. The demonstrated spinning technology also offered an avenue for the fabrication of high-performance filaments and carbon fibers.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c08726?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c08726</a>.Comparison of ID/IG ratio between the lignin/CNF-based carbon fibers in this work and the previously reported values in the literature (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c08726/suppl_file/sc0c08726_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Production of carbon nanofibers from PAN and lignin by solution blow spinning

A COMPARATIVE STUDY OF CELLULOSE NANOWHISKERS (cnws) AND CELLULOSE NANOFIBERS (Cnfs)

Efficient centrifugal spinning of soda lignin for the production of activated carbon nanofibers with highly porous structure

Fabrication and Characterization of Electrospun Poly(acrylonitrile- co-Methyl Acrylate)/Lignin Nanofibers: Effects of Lignin Type and Total Polymer Concentration

Carbon Nanofibers Production via the Electrospinning Process

A Feasible Way To Produce Carbon Nanofiber By Electrospinning From Sugarcane Bagasse

Preparation and Characterization of Highly Porous Polyacrylonitrile Electrospun Nanofibers Using Lignin as Soft Template via Selective Chemical Dissolution Technique

Nanoporous Structured Submicrometer Carbon Fibers Prepared Via Solution Electrospinning of Polymer Blends.

Highly Strong and Conductive Carbon Fibers Originated from Bioinspired Lignin/Nanocellulose Precursors Obtained by Flow-Assisted Alignment and In Situ Interfacial Complexation

Dry-Jet Wet Spinning of Thermally Stable Lignin-Textile Grade Polyacrylonitrile Fibers Regenerated from Chloride-Based Ionic Liquids Compounds

Automated trackspinning of highly oriented, ultrafine lignin fibers as precursors for green carbon nanofibers

Glyoxalation of Kraft lignin and optimization of electrospinning process parameters for producing polyacrylonitrile/KL nanomats for potential applications as carbon material

Effect of adding lignin on preparation and properties of pitch/PAN‐derived electrospun nanofibers inducing cross‐linking structure

Lignin/Poly(vinylpyrrolidone) Multifilament Fibers Dry‐Spun from Water as Carbon Fiber Precursors

Carbon nanofibers based carbon-carbon composite fibers

Investigation on spinnability of low molecular weight alkaline lignin to fabricate biobased carbon fiber

Properties of Carbon Nanofibers Prepared from Polyacrylonitrile/Poly(methyl Methacrylate) Blend

Graphitic nanofibres from electrospun solutions of PAN in dimethylsulphoxide

Solution blowing spinning technology and plasma-assisted oxidation-reduction process toward green development of electrically conductive cellulose nanofibers

Carbon nanofibers prepared by a novel co-extrusion and melt-spinning of phenol formaldehyde-based core/sheath polymer blends

Highly porous multiwalled carbon nanotube buckypaper using electrospun polyacrylonitrile nanofiber as a sacrificial material