Abstract:Plate heat exchangers are widely used in various industries. This study considers using a novel design of fractal shape fins with a new structure on the performance of multi-stream plate-fin heat exchangers for the first time, which has not been studied by researchers before. The numerical study is done with a 3D finite volume method. The effect of using Oil/MWCNT nanofluid and using various configurations of fractal fins with different attack angles ranging from 30 degrees to 100 degrees with the range of Reynolds number of 10,000–40,000, have been studied in the current research. These changing parameters have a significant impact on the flow field and heat transfer in the heat exchanger. The results of this study show that increasing the angle of attack of fractal fins creates more flow deflection and higher fluid mixing. The rise of the Reynolds number creates stronger vortexes as the flow passes over the fins, thereby it can augment the fluid mixing in the areas which are close to the finned. As the Reynolds number rises, the growth of the thermal boundary layer diminished. It can also be seen that as the fluid impacts the fractal fins at higher angles of attack, the temperature distribution becomes more uniform in the heat exchanger. Increasing the Reynolds number from 10,000 to 40,000 increases the heat transfers up to 63 %. At the constant Reynolds numbers, increasing the fraction of solid nanoparticle volume up to 4 % in the cooling fluid augment the heat transfer rate by 48 % compared to the base fluid. Increasing the fluid velocity results the amplification of longitudinal vortex formation. Therefore, the pressure loss is higher at the increased Reynolds numbers. At the lower Reynolds numbers, the pumping power has a weaker dependency on the nanofluids concentration. Increasing the angle of attack of fractal fins increases the pumping power by 50 % compared with the angle of attack of 30 degrees. Increasing the fractal fin angle of attack compared with 30 degrees increases friction by 45–85 %. Changes in the Colburn factor show that considering all parameters that increase heat transfer, the Colburn factor increases by 23–42 % compared with the base scenario with Re = 10,000 and angle of attack = 30 degrees.

Energy saving with using of elliptic pillows in turbulent flow of two-phase water-silver nanofluid in a spiral heat exchanger

Turbulent flows in a spiral double-pipe heat exchanger

Numerical investigation of the simultaneous effect of twisted tape and nanofluid hybrid in shell and spiral tube heat exchanger with a special design

A novel application for energy efficiency improvement using nanofluid in shell and tube heat exchanger equipped with helical baffles

Thermal analysis of nanofluids flow in a double pipe heat exchanger with twisted tapes insert in both sides

Effects of geometrical and operational parameters on heat transfer and fluid flow of three various water based nanofluids in a shell and coil tube heat exchanger

Using different geometries on the amount of heat transfer in a shell and tube heat exchanger using the finite volume method

Numerical study of the effects of geometric parameters and nanofluid properties on heat transfer and pressure drop in helical tubes

Numerical study on the thermal performance of the shell and tube heat exchanger using twisted tubes and Al2O3 nanoparticles

Novel usage of the curved rectangular fin on the heat transfer of a double-pipe heat exchanger with a nanofluid

Heat transfer assessment of turbulent nanofluid flow in a circular pipe fitted with elliptical-cut twisted tape inserts

Property of Water-Nanoparticle Flow and Heat Transfer in the Double-Tube Heat Exchanger with Nanofluid

Two-phase simulation of nanofluid flow in a heat exchanger with grooved wall

Numerical investigation of turbulent nanofluid flow behavior in a multi-stream plate-fin heat exchanger with a novel design of fractal fins

Numerical simulation of nanofluid turbulent flow in a double-pipe heat exchanger equipped with circular fins

Experimental and numerical investigation of flow and thermal characteristics of aluminum block exchanger using surface-modified and recycled nanofluids

Computational investigation on the energy efficiency of heat exchangers using Al2O3 nanofluids

Enhancing thermal performance: a sophisticated analysis of CuO-water nanofluids and twisted tape inserts in tubular heat exchangers-a numerical study

Effect of using hybrid nanofluid and vortex generator on thermal performance of plate–fin heat exchanger: numerical investigation

Numerical Analysis of a Small Size Baffled Shell-and-Tube Heat Exchanger Using Different Nano-Fluids