Abstract:Sandwich piezoelectric transducers are widely used in many industrial applications due to their attractive advantages of compact structure, no electromagnetic interference, and excellent output performance. V-shaped piezoelectric transducers, a typical design, have been adopted as the stator of ultrasonic motors and the machining tool of elliptical vibration surface manufacturing. However, traditional V-shaped piezoelectric transducers were designed with one contact interface to output effective vibration, limiting their applications. To achieve multi contact areas with synchronous actuation function, a novel three-dimensional sandwich piezoelectric transducer is proposed in this study, expecting to drive wheels of a robotic mobile system. Two orthogonal Langevin transducers are adopted to vertically couple in a cylinder, producing two bending vibrations with a spatial phase difference of pi/2 in the cylinder. Therefore, elliptical motion is generated at surface points of two driving parts placed at both ends of the cylinder. Due to the fact that two front-end blocks of the two Langevin transducers and the cylinder form a three-dimensional configuration which hard to be manufactured by traditional machining methods, this part is printed using laser additive manufacturing. To analyze the dynamic behavior of the proposed three-dimensional transducer, an analytical model is carried out utilizing the transfer matrix method for providing systematic modeling. This developed transfer matrix model is not only capable of greatly reducing computation efforts, and it is maybe suitable for the analysis of traditional V-shaped transducers. To validate this developed transfer matrix model and confirm the feasibility of the transducer design, experimental investigations are conducted to measure the vibration characteristics of the proposed transducer prototype using a 3D laser Doppler vibrometer and are compared to the calculation results. The measured and computed resonant frequencies of the transducer are 19.975 kHz and 20.045 kHz for the symmetrical vibration mode, and 20.07 kHz and 20.06 kHz for the anti-symmetrical vibration mode, respectively. Comparisons show that calculation results match well with the experimental results, demonstrating the effectiveness of the developed transfer matrix model and the feasibility of the three-dimensional transducer design. (C) 2018 Elsevier Ltd. All rights reserved.

Simulation and Optimization of Piezoelectric Micromachined Ultrasonic Transducer Unit Based on AlN

Design and Fabrication of High-Performance Piezoelectric Micromachined Ultrasonic Transducers Based on Aluminum Nitride Thin Films

Fabrication Process and Performance Analysis of AlN Based Piezoelectric Micromachined Ultrasonic Transducer with a Suspended Structure.

Performance Improvement of High Frequency Aluminum Nitride Ultrasonic Transducers

Design, Fabrication, Characterization, and Simulation of AlN-Based Piezoelectric Micromachined Ultrasonic Transducer for Sonar Imaging Applications

High speed surface acoustic wave and laterally excited bulk wave resonator based on single-crystal non-polar AlN film

An Aln-Based Piezoelectric Micromachined Ultrasonic Transducer with a Double-Beam Suspended Structure

Design and Fabrication of High-Frequency Piezoelectric Micromachined Ultrasonic Transducer Based on an AlN Thin Film

Enhanced high-frequency piezoelectric ultrasonic transducer based on integrated AlN honeycomb structure

Multiphysics Modeling and Analysis of Sc-Doped AlN Thin Film Based Piezoelectric Micromachined Ultrasonic Transducer by Finite Element Method

Fabrication and DC-Bias Manipulation Frequency Characteristics of AlN-Based Piezoelectric Micromachined Ultrasonic Transducer

Study on AlN Micromachined Ultrasonic Transducer Array with Beamforming

3D FEM Analysis of High-Frequency AlN-Based PMUT Arrays on Cavity SOI

Development of a High-Density Piezoelectric Micromachined Ultrasonic Transducer Array Based on Patterned Aluminum Nitride Thin Film

Design and 3D FEM Analysis of a Flexible Piezoelectric Micromechanical Ultrasonic Transducer Based on Sc-Doped AlN Film

Preparation, Characterization, and Application of AlN/ScAlN Composite Thin Films

Modeling and Characterization of AlN-Based Piezoelectric Micromachined Ultrasonic Transducers

Enhancement of the Transmission Performance of Piezoelectric Micromachined Ultrasound Transducers by Vibration Mode Optimization

A Novel Additive Manufactured Three-Dimensional Piezoelectric Transducer: Systematic Modeling and Experimental Validation

Design of Piezoelectric Ultrasonic Transducer Based on Doped PDMS

Fabrication and Characterization of AlN Based Piezoelectric Micromachined Ultrasonic Transducer for Contact Sensing