Abstract:Abrasive flow machining method is a new precision processing method. Unlike the traditonal mechanical processing, the biggest feature of this technology is its polishing liquid. Because of the rheological properties of the polishing liquid, it can enter into any complex and tiny flow channels without limitation. In addition, according to the size and structure of the machined parts, the suitable polishing fluid can be simply and effectively configured. In the abrasive flow machining process, the inlet velocity is the main parameter affecting the processing efficiency and accuracy of the abrasive flow. Therefore, the inlet velocity is selected as the processing parameter to study the processing effect of the abrasive flow on the part. At present, most of the research content about abrasive flow processing is mainly focused on the machine parameters and abrasive configuration, while the particles decisive role in the whole process was ignoring. The essence of abrasive flow processing is the shear, collision, and friction between the innumerable particles and the processed surface,,so it is great significance to study the distribution and mechanical properties of particles. Based on the above background, the micro-component dispensing head is selected as the simulation and test object in this paper. With the abrasive flow machining technology and the combination of CFD( computational fluid dynamics) and DEM(discrete element method), the fluid simulation software FLUENT was used to perform the numerical analysis of the abrasive flow machining process, and the distribution of fluids and particles during processing were discussed, the distribution of fluids and particles under different inlet velocity conditions was compared and analyzed, the micro-cutting behavior of the abrasive flow machining was revealed. The collision model of the particles impact the processed surface was established. The effect of the abrasive flow on processed surface and the material removal mechanism were clarified. Numerical simulations showed that, with the increase of the inlet velocity, the effects of fluids and particles on the processed surface were enhanced, the friction and collision between the particles and the surface were severer, more kinetic energy of the particles was converted into cutting energy, and the removal rate of the material was improved. The collision model showed that the removal of the surface material was achieved by continuous impact and shear of the particles. The NT100 grating measuring instrument and scanning electron microscope were used to detect the surface topography after the abrasive flow processing. The test results showed that the surface roughness decreased from 2.03μm to 0.65μm., the surface roughness was significantly lower than that before processing, and the surface quality was obviously improved. The study provides a reference for further research on abrasive flow processing and micro-cutting.

Simulation Study on Gap Flow Field in EDM Micro-hole Machining Based on Gas-liquid-solid Three-phase Flow

3D Simulation of the Flow Field in the Machining Gap during EDM

Interelectrode gas–liquid-solid three-phase flow analysis and simulation for drilling holes with high aspect ratio by micro-EDM

Simulation Model of Debris and Bubble Movement in Electrode Jump of Electrical Discharge Machining

Computational Fluid Dynamics Analysis of Working Fluid Flow and Machining Debris Movement in End Electrical Discharge Milling and Mechanical Grinding Compound Machining

Analysis of mechanism of bubble characteristics and molten pool dynamics in EDM based on three-phase flow model

Motion Process Research of Cavitation Bubble of Ultrasonic Electrical Discharge Machining

Simulation and experimentation of renewable dielectric gap flow fields in EDM

High-speed EDM Milling with In-Gas and Outside-Liquid Electrode Flushing Techniques

Dielectric Flushing Optimization of Fast Hole EDM Drilling Based on Debris Status Analysis

Analysis and simulation of micro electro discharge machining process

Improvement of ultrasonic cavitation and pumping effect in microhole EDM

Debris and Bubble Movements During Electrical Discharge Machining

Progress in modeling of electrical discharge machining process

Numerical simulation of the gap flow field for CEDMMG compound machining engineering ceramics

An Investigation into Accumulative Difference Mechanism in Time and Space for Material Removal in Micro-EDM Milling

On high resolution bubbly flow generator for gas-mixed micro electrochemical machining

Performance improvement of high-speed EDM and ECM combined process by using a helical tube electrode with matched internal and external flushing

Experimental Research and Multi-Physical Field Coupling Simulation of Electrochemical Machining Based on Gas–Liquid Two-Phase Flow

Analysis of flow field for ECM square deep hole with two-section square cone combination cathode

Numerical analysis and experiment of abrasive flow machining microhole structure based on CFD-DEM coupling