Abstract:Journal of Thermoplastic Composite Materials, Ahead of Print. Discontinuous-long-fibre (DLF) composites fabricated from pre-impregnated unidirectional (UD) fibre chips are susceptible to structural deficiency. The in-plane highly anisotropic mechanical properties of the chips combined with the random nature of fibre orientation causes local weaknesses within the material when fibres are perpendicular to the load. Recent experimental results have shown that using woven-fibre chips could improve the performance of DLF composites by increasing their average mechanical properties and reducing their variability. To better understand the underlying phenomenon giving an advantage to the woven chips, a finite element model was developed to predict the mechanical properties obtained from a standard tensile test. DLF chips were modelled based on a voxel method where random chip positions were generated by an algorithm developed in this work. ANSYS® software was utilized to model the non-linear response associated with progressive damage of the composite. The maximum stress and the Puck failure criteria were employed to define damage initiation for the woven and UD fibres, respectively. Tensile modulus predictions for both types of chips showed good results when compared to experimental data. Strength predictions for the UD fibres also showed good correlation with experimental results, but the model overestimated the strength of the woven-fibre DLF composite. It appeared that the failure of the UD-fibre composites was associated with matrix failure (transverse tension and in-plane shear). Woven-fibre composites, however, showed damage modes linked to both fibre failure (longitudinal tension) and matrix failure (transverse tension and in-plane shear).

Impact compression damages of 3D braided composites with/without axial yarns after thermo-oxidative ageing

X-ray microtomography analysis of the damage mechanisms in 3D circular braided carbon fiber/epoxy resin composite tubes under axial impact compression

Thermo-oxidative aging induced multi-scale shrinkages and damages in 3D angle-interlock woven composites

Experimental Analysis of the Low-Velocity Impact and CAI Properties of 3D Four-Directional Braided Composites after Hygrothermal Aging

Longitudinal compression fatigue properties of 3D five-directional braided composites at different temperatures

Experimental and numerical study of in-plane compressive properties and failure of 3D six-directional braided composites with large braiding angle

Study on in-plane compression properties and numerical modeling of three dimensional five-directional braided composites

Study of the damage behavior of T800 carbon fiber/epoxy resin composites after low-velocity impact under thermo-oxidative aging

Experimental study on the fabrication, high-temperature properties and failure analysis of 3D seven-directional braided composites under compression

Mechanical Characterization and Impact Damage Assessment of Hybrid Three-Dimensional Five-Directional Composites

High strain rate impact effect and failure behavior of 3D six-directional braided composites

Numerical analyses on thermal stress distribution induced from impact compression in 3D carbon fiber/epoxy braided composite materials

Thermo-mechanical response of 3D braided composites with different braiding angles under high strain rate punch shear loading

A 3D finite element model to simulate progressive damage in unidirectional- and woven-fibre thermoplastic discontinuous-long-fibre composites

Numerical investigation of tensile behavior of three-dimensional six-directional braided composites

Experimental and numerical validation of high strain rate impact response and progressive damage of 3D orthogonal woven composites

Mesoscale progressive damage and strength analysis of three-dimensional braided composites under tension

Influence Of Thermal-Oxidative Aging On Property Of Carbon Fiber Bismaleimide Resin Composites

Analysis of in-plane compression failure mechanism in carbon fiber braided composite with different off-axial angles

A novel mechanical behavior and failure mechanism analysis of 3D six-directional braided composites in liquid nitrogen subjected to compression

Fatigue Behavior of 3D Braided Composites Containing an Open-Hole