Abstract:This paper reports on the development, manufacturing and testing of proportional γ-ray detectors filled with gas mixtures based on high-purity xenon. To let the gas mixtures into the detector, a special installation was developed and manufactured, consisting of components designed to work with high-purity gases. The influence of the gas pressure, its composition (pure Xe or its mixture with H2, CH4), and the voltage at the anode on the spectrometric resolution and gas gain of the detectors was studied. The addition of H2 or CH4 to xenon is used to increase the charge carrier drift velocity. These additives also stabilize the gas mixture, i. e. decrease the probability of gas breakdown at high voltage between the detector electrodes. Gas xenon, as well as its mixtures, of research purity grade (99.9999%) have been used. Proportional γ-ray detectors based on xenon gas can operate in both counting and spectrometric modes. To study the characteristics of the detectors, we used standard sources of γ-radiation 241Am, 137Cs, 152Eu, 133Ba. The best energy resolution values to date were obtained for a detector filled with a gas mixture of Xe + 2.1% CH4 at a pressure of 2.5 bar and an anode voltage of 2500 V; they were ~ 9.5% for an energy of 40 keV and ~ 5% for 120 keV. In the manufacturing of detectors intended for radiation monitoring and identification of radioactive materials, in particular in nuclear power, complex materials science problems have been solved. To increase the thermal and radiation resistance, all elements of the detector construction are made of materials that are weakly activated by ionizing radiation. In addition, the design of the detectors is completely free of glass elements and organic components. The detectors are designed to monitor technological processes and to work as part of radiation monitoring systems, including those at nuclear power plants.

Carrier gas attenuation in gamma assay of radioactive xenon samples

Gas-Filled Gamma-Radiation Detector Based on High-Purity Xenon

Hand-Held Gamma Detector Based on High-Pressure Xenon Gas: Determination of Charge Carrier Lifetime in Xe

Use of Xenon and Krypton as Carrier Gases for a Highly Sensitive Detection System for Gas Chromatography

Efficiency calibration and self-attenuation correction in radioxenon measurement using β-γ coincidence method

Geant4 Simulation of Detection Efficiency and Self-Attenuation Effect of Β Particles for Radioxenon Measurement Using Β−γ Coincidence Equipment

Measurement of the 134Xe(n,2n)133m,gXe and 136Xe(n,2n)135m,gXe reaction cross-sections and isomeric ratios induced by the 14.8 MeV neutrons

Monte Carlo simulation of x-ray absorption and electron drift in gaseous xenon

Study on Decontaminating Radon from Xenon by Preparative Gas Chromatography

A simple high-sensitivity technique for purity analysis of xenon gas

An homeopathic cure to pure Xenon large diffusion

Pulse shape analysis of scintillation signals from pure and xenon-doped liquid argon for radioactive background identification

Gas Proportional Scintillation Counter with Xenon and Xenon Mixtures

Measurement of Quantity of Xenon Adsorbed on Surface of Plastic Scintillator by Neutron Activation Analysis Method

Design of simulated-gas calibration source and self-attenuation correction methods for radioactive noble gas measurement with HPGe detector

Measurements of Electron Transport in Liquid and Gas Xenon Using a Laser-Driven Photocathode

Efficiency Measurement of NaI(Tl) Detector for a Long Tube Volume Source of 6.13mev Gamma-Ray

Characterization of alpha and beta interactions in liquid xenon

Xenon purity analysis for EXO-200 via mass spectrometry

Investigating the slow component of the infrared scintillation time response in gaseous xenon

Radon background in liquid xenon detectors