Abstract:Transmission X-ray security scanners are deployed to detect smuggling of contraband articles, including weapons, narcotics, and explosives, for the purposes of homeland security. Current X-ray scanners use a fixed tube voltage (i.e., 160 kV); hence, they have a limitation in detecting thinly coated and/or low-density objects. To overcome this limitation, we are developing an X-ray scanner that applies variable tube voltage according to the physical/chemical properties of the object being inspected. To this end, in our previous study, Monte Carlo simulations with Geant4 (GEometry ANd Tracking4) and MCNP (Monte Carlo N Particle) were performed to optimize the design of the X-ray scanner for variable tube voltages. The MCNP was used to simulate the radiation generator for the X-ray source term, and the Geant4 was used to optimize the design of the dual-energy detector and to obtain the detector counts. In the present study, we experimentally validated the reliability of the Monte Carlo simulation model for the X-ray scanner. An 241 Am source and a radiation generator were employed in this validation. For the 241 Am source, the dual-energy detector signal was measured at a distance of 1 cm from the detector. In the case of the radiation generator, the source-to-object distance and the source-to-detector distance were 70 cm and 120 cm, respectively, as used in a typical X-ray security scanner. The tube voltage and the current were 140 kV and 10 mA, respectively. To obtain the X-ray images, the object was scanned while moving at a speed of 0.2 m/s on a conveyor system. The X-ray source term used in the simulation was obtained by monoenergetic-electron-beam bombardment onto the target. 4-D simulations were performed for the moving object. To validate the simulation model, we compared the simulated and measured image profiles, as well as the pixel counts of the dual-energy detector. The percent differences between the simulated and measured pixel counts and the image profiles were all within 5%. Thus, we concluded that our simulation model for the X-ray scanner can be considered to be reliable.

Monte Carlo simulation of x-ray absorption and electron drift in gaseous xenon

Distortion effects in soft-x-ray energy spectra for xenon gaseous detectors: A Monte Carlo simulation study

A Simulation Study on the Flash X-Ray Spectra Spatial Distribution

Molecular Dynamics Method of Scattering of the Xenon Atom from the Platinum Surface

Development of a Monte Carlo tool for simulating electron transport in noble liquids

Simulation of Radiative Transfer Within X-ray Microcalorimeter Absorbers

Measurements of Electron Transport in Liquid and Gas Xenon Using a Laser-Driven Photocathode

Characterization of alpha and beta interactions in liquid xenon

An homeopathic cure to pure Xenon large diffusion

Monte Carlo simulations of the electron-gas interactions in the KATRIN experiment

Electron drift and longitudinal diffusion in high pressure xenon-helium gas mixtures

Experimental validation of Monte Carlo simulation model for X-ray security scanner

MCNP simulations of medical diagnostic X-ray spectra

A Monte Carlo study of the fluctuations in Xe electroluminescence yield: pure Xe vs Xe doped with CH4 or CF4 and planar vs cylindrical geometries

Primary and secondary scintillation measurements in a xenon Gas Proportional Scintillation Counter

Modeling pulse characteristics in Xenon with NEST

A Hybrid Monte Carlo Model for the Energy Response Functions of X-Ray Photon Counting Detectors

Scintillation decay-time constants for alpha particles and electrons in liquid xenon

Simulation results for a low energy nuclear recoil yields measurement in liquid xenon using the MiX detector

Monte-Carlo Geant4 numerical simulation of experiments at 247-MeV proton microscope