Abstract:Solidification/stabilization (S/S) is a low-cost and efficient method for enhancing the mechanical properties of gold ore tailings powder (GTP) and decontaminating tailings. However, the traditional cement-based stabilization method is associated with environmental pollution and questionable sustainability. In this study, industrial waste residue was mixed with alkaline activators to prepare a sustainable waste-based composite geopolymer (WCG) to stabilize the GTP. Considering the cost of the novel geopolymer and the economic constraints of mining enterprises, a ratio of 5% geopolymer and 95% GTP was selected. The hydration mechanism, microstructure, mechanical properties, and leaching characteristics were analyzed after curing periods of 3, 7, 14, 28, and 90 days (d). The tests included phase structure analysis via x-ray diffraction analysis, thermogravimetric analysis and unconfined compression strength tests to evaluate the hydration products and strength of the stabilized GTP. The results showed that the increase in amorphous/unidentified content was not obvious after 28 d of curing and that the stabilized tailings with the same content of WCG had higher mechanical strength than those stabilized with ordinary Portland cement (32.5 MPa). Scanning electron microscope-energy dispersive spectroscopy and nitrogen adsorption tests were used to characterize the microstructure of the stabilized materials. These results indicate that the formation of C-(A)-S-H gels contributed to improvement in the degree of compaction of the stabilized samples. The immobilization mechanism of arsenic included precipitation, physical encapsulation, adsorption, and ion substitution. The stabilized materials had a dual-pore fabric characterized by interaggregate and intra-aggregate pores. The properties of the leaching solution, including the pH, electrical conductivity, oxidation-reduction potential, and heavy metal ion leaching concentrations, were determined to evaluate the leaching performance of the stabilized GTP. The relationship between the chemical properties of the leaching solution and the concentration of the leaching ions was analyzed to explain the immobilization mechanism of harmful elements. All harmful elements were well immobilized after 7 d of curing, and the leaching concentration remained constant over a longer curing time. This study provides a reference for the sustainable management of GTP and for improving the stabilization of tailings dams.

Immobilization of uranium tailings by phosphoric acid-based geopolymer with optimization of machine learning

Preparation and related properties of geopolymer solidified uranium tailings bodies with various fibers and fiber content

Immobilization of uranium soils with alkali-activated coal gangue–based geopolymer

Immobilization of uranium soil by geopolymer coupled with nHAP

Phosphoric acid-activated metakaolin-based geopolymer: Optimizing P/A molar ratio to solidify Cs+ and Sr2+ in nuclear waste

Synthesis of tailing slurry-based geopolymers for the highly efficient immobilization of heavy metals: Behavior and mechanism

Solidification/stabilization of gold ore tailings powder using sustainable waste-based composite geopolymer

Effects of Spodumene Flotation Tailings on Mechanical Properties of Acid-Based Geopolymer Mortar

Preparation and properties of geopolymer containing phosphoric acid-activated fly ash and mechanically-milled kaolinite: Experiments and density function theory

Iron-calcium reinforced solidification of arsenic alkali residue in geopolymer composite: Wide pH stabilization and its mechanism

Optimizing raw material composition and alkali content in low silicon-aluminum tailings-based geopolymers

Experimental synthesis of geopolymer adsorbent based on molecular dynamics simulation and adsorption mechanism of uranium in different channel sizes

Preparation and Immobilization Mechanism of Red Mud/Steel Slag-Based Geopolymers for Solidifying/Stabilizing Pb-Contaminated Soil

Stabilization/solidification mechanisms of tin tailings and fuming slag-based geopolymers for different heavy metals

Highly-efficient fluoride retention in on-site solidification/stabilization of phosphogypsum: Cemented paste backfill synergizes with poly-aluminum chloride activation

Elaboration of geopolymer package derived from uncalcined phosphate sludge and its solidification performance on nuclear grade resins loaded with 134Cs

The Synergistic Mechanism and Stability Evaluation of Phosphogypsum and Recycled Fine Powder-Based Multi-Source Solid Waste Geopolymer

Effect of PFDS on the immobilization of Cs + by metakaolin-based geopolymers in complex environments

Preparation and characterization of industrial solid waste based geopolymer for immobilizing Pb and Cd in the sediment

Preparation of geopolymer based on municipal solid waste incineration fly ash-phosphorus slag and its function for solidification of heavy metals

Early solidification/stabilization mechanism of heavy metals (Pb, Cr and Zn) in Shell coal gasification fly ash based geopolymer