Abstract:The deformation-induced surface roughening of an Al-Mg alloy is analyzed using a combination of experiments and modeling. A mesoscale oligocrystal of AA5052-O, obtained by recrystallization annealing and subsequent thickness reduction by machining, that contains approx. 40 grains is subjected to uniaxial tension. The specimen contains one layer of grains through the thickness. A laser confocal microscope is used to measure the surface topography of the deformed specimen. A finite element model with realistic (non-columnar) shapes of the grains based on a pair of Electron Back-Scatter Diffraction (EBSD) scans of a given specimen is constructed using a custom-developed shape interpolation procedure. A Crystal Plasticity Finite Element (CPFE) framework is then applied to the voxel model of the tension test of the oligocrystal. The unknown material parameters are determined inversely using an efficient, custom-built optimizer. Predictions of the deformed shape of the specimen, surface topography, evolution of the average roughness with straining and texture evolution are compared to experiments. The model reproduces the averaged features of the problem, while missing some local details. As an additional verification of the CPFE model, the statistics of surface roughening are analyzed by simulating uniaxial tension of an AA5052-O polycrystal and comparing it to experiments. The averaged predictions are found to be in good agreement with the experimentally observed trends. Finally, using the same polycrystalline specimen, texture–morphology relations are discovered, using a symbolic Monte Carlo approach. Simple relations between the Schmid factor and roughness can be inferred purely from the experiments. Novelties of this work include: realistic 3D shapes of the grains; efficient and accurate identification of material parameters instead of manual tuning; a fully analytical Jacobian for the crystal plasticity model with quadratic convergence; novel texture–morphology relations for polycrystal.

Influence of a Static Reversible Loading on Mechanical and Elastic Properties of Polycrystalline Aluminum Alloy AMg6

Simulation of Deformation and Fracture in Polycrystalline Aluminum Alloy under Dynamic Loading

Plasticity evolution of an aluminum-magnesium alloy under abrupt strain path changes

Dynamic plasticity of AZ31 magnesium alloy: Experimental investigation and constitutive modeling

Dynamic Mechanical Behavior and Microstructural Evolution of the Al-6Mg Alloy Subjected to Three Treatment Conditions

Influence of the Metal Structure and Plastic Deformation on the Nonlinear Acoustic Parameter

Numerical Analysis of Experiments on Damage and Fracture Behavior of Differently Preloaded Aluminum Alloy Specimens

Strain Hardening of 1565ch, AMg6, 01570, and 1580 Aluminum Alloys in the Process of Cold Rolling of Plates

Effects of Dynamic Multi-directional Loading on the Microstructural Evolution and Thermal Stability of Pure Aluminum

Analysis of ductile damage and fracture under reverse loading

Polycrystalline Behavior Analysis of Extruded Magnesium Alloy AZ31

Nonlinear response to contact impact on the surface of an aluminum alloy AlMg6 exhibiting the Portevin-Le Chatelier effect

Experimental Investigation and FE Analysis on Constitutive Relationship of High Strength Aluminum Alloy under Cyclic Loading

Dynamic Behavior of Aluminum Alloy Aw 5005 Undergoing Interfacial Friction and Specimen Configuration in Split Hopkinson Pressure Bar System at High Strain Rates and Temperatures

Acoustic anisotropy and localization of plastic deformation in aluminum alloys

Numerical Study of Inelastic Behavior of Magnesium Alloy Sheets During Cyclic Loading-Unloading

Room-Temperature Microstructural Evolution of Extruded AM80 Magnesium Alloys under Dynamic Loading

Deformation-Induced Surface Roughening of an Aluminum–Magnesium Alloy: Experimental Characterization and Crystal Plasticity Modeling

Study on Constitutive Model of Cyclic Elastoplastic Behavior of 6082-T6 Aluminum Alloy

The Influence of Impac-Oscilation Loading on the Hardness of Surface Layers of D16ChATW Aluminum Alloy

Experimental and numerical investigation on plasticity and fracture behaviors of aluminum alloy 6061-T6 extrusions