Abstract:Piezoelectric energy harvesting systems have been drawing the attention of the research community over recent years due to their potential for recharging/replacing batteries embedded in low-power-consuming smart electronic devices and wireless sensor networks. However, conventional linear piezoelectric energy harvesters (PEH) are often not a viable solution in such advanced practices, as they suffer from a narrow operating bandwidth, having a single resonance peak present in the frequency spectrum and very low voltage generation, which limits their ability to function as a standalone energy harvester. Generally, the most common PEH is the conventional cantilever beam harvester (CBH) attached with a piezoelectric patch and a proof mass. This study investigated a novel multimode harvester design named the arc-shaped branch beam harvester (ASBBH), which combined the concepts of the curved beam and branch beam to improve the energy-harvesting capability of PEH in ultra-low-frequency applications, in particular, human motion. The key objectives of the study were to broaden the operating bandwidth and enhance the harvester's effectiveness in terms of voltage and power generation. The ASBBH was first studied using the finite element method (FEM) to understand the operating bandwidth of the harvester. Then, the ASBBH was experimentally assessed using a mechanical shaker and real-life human motion as excitation sources. It was found that ASBBH achieved six natural frequencies within the ultra-low frequency range (<10 Hz), in comparison with only one natural frequency achieved by CBH within the same frequency range. The proposed design significantly broadened the operating bandwidth, favouring ultra-low-frequency-based human motion applications. In addition, the proposed harvester achieved an average output power of 427 μW at its first resonance frequency under 0.5 g acceleration. The overall results of the study demonstrated that the ASBBH design can achieve a broader operating bandwidth and significantly higher effectiveness, in comparison with CBH.

A piezoelectric energy harvester using an arc-shaped piezoelectric cantilever beam array

Linear Segmented Arc-Shaped Piezoelectric Branch Beam Energy Harvester for Ultra-Low Frequency Vibrations

A Multi-Mode Broadband Vibration Energy Harvester Composed of Symmetrically Distributed U-Shaped Cantilever Beams

A Hybrid Piezoelectric and Electromagnetic Broadband Harvester with Double Cantilever Beams

Harvesting vibration energy through a cantilever beam with enhanced harvesting capability

A piezoelectric cantilever-beam energy harvester (PCEH) with a rectangular hole in the metal substrate

A piezoelectric energy harvester with parallel connection using beams of different lengths to improve output performance

Design, Manufacture and Test of Piezoelectric Cantilever-Beam Energy Harvesters with Hollow Structures

A multi-folded-beam piezoelectric energy harvester for wideband energy harvesting under ultra-low harmonic acceleration

A U-shaped multi-modal bi-directional piezoelectric energy harvester

A distributed-parameter electromechanical coupling model for a segmented arc-shaped piezoelectric energy harvester

Design and Optimization of Piezoelectric Cantilever Beam Vibration Energy Harvester

Numerical and experimental investigation of an auxetic piezoelectric energy harvester with frequency self-tuning capability

A novel horizontal self-tuning piezoelectric energy harvester based on a beam-slider system

Multimodal Multidirectional Piezoelectric Vibration Energy Harvester by U-Shaped Structure with Cross-Connected Beams

Multi-piezoelectric energy harvesters array based on wind-induced vibration: Design, simulation, and experimental evaluation

Design, development, and theoretical and experimental tests of a nonlinear energy harvester via piezoelectric arrays and motion limiters

Vibration Energy Conversion Power Supply Based on the Piezoelectric Thin Film Planar Array

An enhanced broadband piezoelectric energy harvester via elastic amplification structure for multidirectional vibration

Design and analysis of a hollow triangular piezoelectric cantilever beam harvester for vibration energy collection

A Self-Powered P-SSHI Array Interface for Piezoelectric Energy Harvesters With Arbitrary Phase Difference