Abstract:Piezoelectric energy harvesting from roadways, which converts ambient vibration energy of roads into electric energy, has a wide range of potential applications in intelligent transportation systems. On-site open-traffic tests revealed that energy harvested by piezoelectric energy harvester (PEH) units embedded in roadways is far less than the value in laboratories, which may be because the parameters of traffic flow load (frequency, distribution, wave shape, etc.) and the road structure are significantly different from the pre-established conditions in laboratories or even on-site tests with only one vehicle passing. To address this issue, an analytical model for piezoelectric energy harvesting from roadways under open-traffic conditions was proposed to examine the mechanical response of the road structure and the electrical performance of the stack PEH units embedded in the road. The influence of all parameters in the energy-harvesting system was then obtained with the scaling law method, revealing that the energy harvested by PEH units is determined by the energy coefficient, the system's intrinsic parameter, normalized parameters of roadways, and the normalized embedded position of PEH units. It is found that that the energy-harvesting system's intrinsic parameter should be approximately 0.8 to ensure maximum energy-harvesting efficiency. Meanwhile, the pavement with lower bending stiffness and higher linear density while the foundation with small stiffness and smaller damping coefficient would be more suitable for energy harvesting. Furthermore, the lateral embedded position of PEH units should be carefully chosen, since the units embedded in an optimal position can harvest three times more than that embedded in other positions. The concise criteria presented in this study will be used as a reference not only for material selection, dimension optimization, and embedded positions determination of PEH units but also for choosing of the optimal roadways to achieve maximum piezoelectric energy harvesting efficiency under open-traffic conditions.

Design and analysis of a hollow triangular piezoelectric cantilever beam harvester for vibration energy collection

The Optimal Design of a Piezoelectric Energy Harvester for Smart Pavements

Optimal Locations of Piezoelectric Patch on Wideband Random Point-Driven Beam for Energy Harvesting

Piezoelectric Energy Harvesting from Roadways under Open-Traffic Conditions: Analysis and Optimization with Scaling Law Method

A piezoelectric energy harvester using an arc-shaped piezoelectric cantilever beam array

Design and Optimization of Piezoelectric Cantilever Beam Vibration Energy Harvester

Study on the Influence Factors on Harvesting Capacity of a Piezoelectric Vibration Energy Harvesting System Covered on Curved Beam with Acoustic Black Hole

Enhanced piezoelectric harvester for track vibration based on tunable broadband resonant methodology

The Analysis and Design of a High Efficiency Piezoelectric Harvesting Floor with Impacting Force Mechanism

Multimodal Multidirectional Piezoelectric Vibration Energy Harvester by U-Shaped Structure with Cross-Connected Beams

Harvesting vibration energy through a cantilever beam with enhanced harvesting capability

Analysis of Dynamic Characteristics of Tristable Exponential Section of Piezoelectric Energy Harvester

Design, Manufacture and Test of Piezoelectric Cantilever-Beam Energy Harvesters with Hollow Structures

Model and Dynamic Analysis of the Electro-mechanical Coupling System of Piezoelectric Vibration Energy Harvesters

Design and dynamic analysis of integrated architecture for vibration energy harvesting including piezoelectric frame and mechanical amplifier

A distributed-parameter electromechanical coupling model for a segmented arc-shaped piezoelectric energy harvester

A rotational piezoelectric energy harvester based on trapezoid beam: Simulation and experiment

A Tri-Stable Piezoelectric Vibration Energy Harvester for Composite Shape Beam: Nonlinear Modeling and Analysis

Efficient piezoelectric harvester for random broadband vibration of rail

Vibration Characteristics and Experimental Research of Combined Beam Tri-Stable Piezoelectric Energy Harvester

A U-shaped multi-modal bi-directional piezoelectric energy harvester