Abstract:Two kinds of novel macroporous silica-based chelating polymeric adsorption materials, TODGA/SiO2-P and CMPO/SiO2-P, were synthesized by impregnating and immobilizing two chelating agents, N,N,N′,N′-tetraoctyl-3-oxapentane-1,5-diamide (TODGA) and octyl(phenyl)-N,N-diisobutylcarbamoylmethylphoshine oxide (CMPO), into the pores of SiO2-P particles. To separate minor actinides (MA(III)) such as Am(III) and Cm(III), the adsorption and elution of 13 typically simulated fission products from a 3M HNO3 were performed. It was found that in the first column packed with TODGA/SiO2-P, all of the simulated elements were separated effectively into four groups: (1) Cs(I), Mo(VI), and the most portion of Ru(III) (non-adsorption group), (2) Sr(II), small portion of Gd(III) and all of light REs(III) (MA–lRE–Sr group), (3) most of Gd(III) and all heavy RE(III) (hRE group), and (4) Zr(IV), Pd(II), and a little of Ru(III) (Zr–Pd group) by eluting with 3.0M HNO3, 1.0M HNO3, distilled water, and 0.5M H2C2O4, respectively, at 298K. MA(III) was predicted to flow into the second group along with Nd(III) because of their close adsorption-elution onto TODGA/SiO2-P. In the second column packed with CMPO/SiO2-P, MA–lRE–Sr group was separated into (1) Sr(II), (2) middle RE(III) such as Gd(III), Eu(III), Sm(III), and quite small portion of Nd(III) (MA–mRE), and (3) light RE(III) such as La(III), Ce(III), and most of Nd(III) by eluting with 3.0M HNO3 and 0.05M DTPA-pH 2.0, respectively, at 323K. MA(III) was believed to flow into MA–mRE group along with Gd(III) due to their similar adsorption properties towards CMPO/SiO2-P. Based on positions of MA(III) appeared in light and heavy RE(III), an improved MAREC process for MA(III) partitioning from HLW was proposed.

Extraction of Pm-147 from savannah river site nuclear material management programs

Optimization of the radiochemical separation and determination for 147Pm and 151Sm in nuclear waste samples

Palladium Removal from the Simulated Nuclear Spent Fuel Solution Using a Silica‐Based SiPyR‐N3 Anion Exchanger

Synthesis and Application of A Macroporous Silica-Based Polymeric Octyl(Phenyl)-N,N-Diisobutylcarbamoylmethylphoshine Oxide Composite for the Chromatographic Separation of High Level Liquid Waste

A New Partitioning Process for High-Level Liquid Waste by Extraction Chromatography Using Silica-Substrate Chelating Agent Impregnated Adsorbents

Development of Palladium Separation Process from Nitric Acid Medium Utilizing a New Hybrid Multi-Nitrogen Adsorbent

Synthesis of Two Novel Macroporous Silica-Based Impregnated Polymeric Composites and Their Application in Highly Active Liquid Waste Partitioning by Extraction Chromatography

A chemical separation procedure using ionic liquid extraction for 59 Fe and 55 Fe quantification

Separation of Protactinium Employing Sulfur-Based Extraction Chromatographic Resins

Use of Hydrated Antimony Pentoxide (HAP) for Fission Product Removal from Irradiated U Solutions: Application to a Homogeneous Reactor Fuel Reprocessing

An overview of solvent extraction processes developed in Europe for advanced nuclear fuel recycling, part 1 — heterogeneous recycling

Head-End Dissolution for UC Processes and UC-PuC Reactor Fuels

Technology for Reprocessing Mother–Wash Solution after Crystallization Purification of Spent Nuclear Fuel from High Temperature Gas-Cooled Reactor

Radioanalytical method for the separation of trace plutonium and neptunium from uranium

Selective separation of rare earth, Sr, Mo, and Zr from simulated raffinate of uranium/plutonium co-purification process

Purification of U from U-10Mo scrap generated during the fabrication of high performance research reactor fuel

Development of A Simplified Separation Process of Trivalent Minor Actinides from Fission Products Using Novel R-Btp/Sio2-P Adsorbents

Systematic Separation of Fission Products by Solvent Extraction Method

Group Hexavalent Actinide Separation from Lanthanides Using Sodium Bismuthate Chromatography

New approaches to the separation and concentration of americium in high oxidation forms for the fractionation of high-level waste

Direct Separation of Minor Actinides from High Level Liquid Waste by Me 2 - CA-BTP/SiO 2 -P Adsorbent