Abstract:Purpose Prefabricated pier technology has the advantages of quick construction time, relatively little traffic interference and relatively small environmental impact. However, its applicability under earthquake conditions is not yet fully understood. The seismic performance and influence parameters of a prefabricated concrete pier connected by embedded grouting sleeve (GS) in a pile cap are investigated in this study. Design/methodology/approach Two prefabricated pier scale model specimens with different reinforcement anchorage lengths and two comparative cast-in-place (CIP) pier model specimens are designed and manufactured for a seismic simulation shaking table. With the continuous increase of input ground motion strength, the changes in basic dynamic characteristics, damage development, acceleration and displacement variation laws, and pier bottom strain responses are compared among the specimen. The finite element software ABAQUS is used to simulate the test pier. Findings The crack location of the two prefabricated pier specimens is almost the same as that of the CIP pier specimens; CIP pier specimens show more penetrated cracks than prefabricated pier specimens, as well as an earlier crack penetration time. The acceleration, displacement and strain response of the CIP pier specimens are more affected by earthquake activity than those of the prefabricated pier specimens. The acceleration, displacement and strain responses of the two prefabricated piers are nearly identical. The finite element results are in close agreement with the acceleration and displacement response data collected from the test, which verifies the feasibility of the finite element model established in ABAQUS. Originality/value A GS connection method is adopted for the prefabricated pier, and on the premise of meeting the minimum reinforcement anchorage length required by the code, this study explores the influences of different reinforcement anchorage lengths on the seismic performance of prefabricated piers in high-intensity areas. A shaking table loading test is used to simulate the real changes of the structure under the earthquake. This work may provide a valuable reference for the design and seismic performance analysis of prefabricated pier, particularly in terms of seismic stability.

Structural system design and earthquake response analysis of prefabricated pile-plate bridge

Stochastic seismic responses analysis of long-span rigid-framed bridge with high piers considering travelling wave effect

Analytical Calculation Method of Seismic Resistant Response for Posttensioned Precast Bridge Piers

A Parametric Investigation on Ultra-low Cycle Fatigue Damage of Steel Bridge Piers under Horizontal Bi-directional Seismic Excitations

Experimental Studies on Seismic Behavior of Steel Pile-to-Pile-Cap Connections

Networked pseudodynamic testing of bridge pier and precast pile foundation

Stochastic Seismic Response Analysis of Long-span Continuous Rigid Frame Bridge

Seismic Analysis of Long Span Continuous Rigid-Frame Bridge with Thin-Walled High Piers

SEISMIC DESIGN METHOD OF SMALL AND MEDIUM SPAN BRIDGE CONSIDERING BEARING FRICTION SLIPPING

Displacement and Force Analyses of Piles in the Pile-Caisson Composite Structure under Eccentric Inclined Loading Considering Different Stratum Features

Seismic response analysis of the precast double-deck rocking frame bridge pier system

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Study on Seismic Performance Optimization of Assembly Concrete-Filled Steel Tubular (CFST)-Laced Piers

Vehicular impact resistance of highway bridge with seismically-designed UHPC pier

Shaking table test on single segment prefabricated concrete bridge pier connected by grouting sleeve

Seismic behaviors of precast assembled bridge columns connected with prestressed threaded steel bar: Experimental test and hysteretic model

Mechanical Behavior of a Double-Column Self-Centering Pier Fused with Shear Links

Large-scale shaking table model test on seismic performance of bridge-pile-foundation slope with anti-sliding piles: a case study

Dynamic and Mitigation Analysis of Seismic Pounding Effect on Multi-Span Highway Bridges Subjected to Spatial Earthquakes

Experimental and numerical studies on the displacement and load-transfer mechanism of pile-caisson composite structure