Abstract:In current structural steel design specifications, the stability of members is typically assessed through the use of buckling curves which implicitly consider the influence of both initial geometric imperfections and residual stresses. An alternative and more direct approach is to perform a second order analysis of the member or structure with all imperfections included. For modelling convenience, i.e. to avoid the explicit modelling of residual stresses, so-called 'equivalent' geometric imperfections are typically utilised, which consider the combined influence of both geometric imperfections and residual stresses through an increased geometric imperfection amplitude. For columns and beams, equivalent geometric imperfections for use in design by geometrically and materially nonlinear analysis with imperfections (GMNIA) have recently been developed. However, for beam-columns, which are subjected to combined compression and bending, there are currently no specific provisions. Therefore, equivalent geometric imperfections for application in the stability design of steel and stainless steel beam-columns by GMNIA are developed herein. The proposals are calibrated against the results of benchmark finite element (FE) simulations performed on a large number of steel and stainless steel I-section or hollow section beam-columns, with or without intermediate lateral restraints, subjected to various ratios of axial compression and major and/or minor bending moments. Proposals for the shapes and amplitudes of equivalent geometric imperfections are developed for application with both eigenmode-affine imperfections e 0,mod and the direct modelling of sinusoidal bow imperfections e 0,bow . Relative to the traditional Eurocode design calculations, employing the developed equivalent geometric imperfections in GMNIA provides more accurate resistance predictions. The reliability analysis of the design provisions shows that partial safety factors of 1.0 for steel and 1.1 for stainless steel can be safely adopted.

Measurement, Characterization, and Modeling of Initial Geometric Imperfections in Wide-Flange Steel Members Subjected to Combined Axial and Cyclic Lateral Loading

Numerical Studies on Full-Scale Steel Columns under Complex Seismic Loading

An Imperfection Measurement System for Thin-Shell Structures Based on a Laser Displacement Meter

Form of Circumferential Weld-Induced Imperfections for Tapered-Wall Cylindrical Shell Structures

Probabilistic study and numerical modelling of initial geometric imperfections for 3D steel frames in advanced structural analysis

Inelastic Storey-Buckling Factor of Steel Frames

Experimental study and numerical simulation of seismic performance of stiffened thin steel plate shear walls considering the effect of vertical load on frame column

Geometric Dimension and Imperfection Measurements of Box-T Section Columns Using 3D Scanning

Effect of Local Geometric Imperfections on Axial Buckling of Welded Steel Tanks

Buckling Behavior Analysis of Thin-Walled Cylindrical Shell Structure under Localized Axial Compression Load Based on Initial Imperfection Sensitivity

Numerical Investigation and Design of Thin-Walled Complex Section Steel Columns

A novel method and modelling technique for determining the initial geometric imperfection of steel members using 3D scanning

Advances in Buckling Analysis of Axial Compression Loaded Thin-walled Cylindrical Shells Based on Initial Imperfection Sensitivity

Observations from Cyclic Tests on Deep, Wide-Flange Beam-Columns

Equivalent geometric imperfections for the design of steel and stainless steel beam-columns by GMNIA

Analytical investigation of the cyclic behavior and plastic hinge formation in deep wide-flange steel beam-columns

Use of 3D Laser Scanning on Evaluating Reduction of Initial Geometric Imperfection of Steel Column with Pre-Stressed CFRP

Measurement and Characterization of the Initial Geometric Imperfections in High Strength U-ing, O-ing and Expanding Manufactured Steel Pipes

Load Eccentricity of Compressed Composite Z-Columns in Non-Linear State

Materials Constitutive Analysis on Local Buckling Damage Description of Steel Frame Members

An experimental methodology to characterize load-based fracture models of third generation advanced high strength steel resistance spot welds