Abstract:A coupled thermo-metallo-mechanical model is proposed to analyse the temperature, stress and microstructure fields in multi-pass welding of P92 pipes. An axisymmetric model is adopted to increase the efficiency of the simulation. To preserve the temperature field from a three-dimensional (3D) analysis, a procedure is proposed to convert the 3D result into a two-dimensional (2D) form, which is compared to temperature fields created by other 2D heat transfer analyses. A metallurgical algorithm, which does not need the calibration with metallurgical experiments, is implemented in the finite element (FE) analysis to predict spatial distributions of product phases during multi-pass welding. Comparison between the predictions and the metallurgical graphs is made to verify the effectiveness of the metallurgical analysis after twenty thermal cycles. Hardness test is also employed to characterize the microstructure and to validate the metallurgical predictions. Five temperature fields, one created from the newly proposed approach and four from existent ones, are used as external loads to conduct the mechanical analysis. The volumetric change due to the phase transformation is considered as an extra volumetric strain, which is implemented by user subroutine. The stress distributions predicted using the five temperature fields are plotted together with the 3D stress result to examine the effectiveness of the developed procedure. The stress at the external surface of the pipe is measured by the X-ray diffraction technique, and is further compared to the stress predictions. The advantage of the model is demonstrated by comparing the computational time consumed in the mechanical analysis.

Measurement and Characterization of the Initial Geometric Imperfections in High Strength U-ing, O-ing and Expanding Manufactured Steel Pipes

Simulation and Analysis of UOE Pipe Production Processing by Three-Dimensional Finite Element Method

A study of local mechanical properties of 304L SS welded joints subjected to cyclic straining using depth-sensing instrumented indentation

An Imperfection Measurement System for Thin-Shell Structures Based on a Laser Displacement Meter

Measurement of deformed surface and key data processing based on reverse engineering

Use of instrumented indentation testing to study local mechanical properties of 304L SS welded joints subjected to low-cycle fatigue loadings

3D Reconstruction of Small-diameter Pipes Inner Surface Based on Structural Light

The research on pipe structural behavior of 3D UOE manufacturing process

Measurement, Characterization, and Modeling of Initial Geometric Imperfections in Wide-Flange Steel Members Subjected to Combined Axial and Cyclic Lateral Loading

Local Geometric Measurement for 3-D Curved Micro-Pipe

Microwave Measurement and Quantitative Evaluation of Wall Thinning in Metal Pipes

Thermal, metallurgical and mechanical analysis of circumferentially multi-pass welded P92 steel pipes

Geometric Dimension and Imperfection Measurements of Box-T Section Columns Using 3D Scanning

A numerical method for predicting O-forming gap in UOE pipe manufacturing

Numerical Study on the X80 UOE Pipe Forming Process

Surface Defect Inspection of Pressure Equipment Based on Indentation and Numerical Simulation

Inhomogeneous Strain Behaviors of the High Strength Pipeline Girth Weld under Longitudinal Loading

Numerical Simulation and Parametric Study of UOE Pipe Forming Process

Analysis and Simulation of the UOE Pipe Production Processing by Finite Element Method

Numerical Simulation of X90 UOE Pipe Forming Process

Improving CNC Machine Tool Geometric Precision Using Manufacturing Process Analysis Techniques