Abstract:Performing a reliable stability analysis of a landslide slope requires a good understanding of the internal geometries and an accurate characterisation of the geotechnical parameters of the identified strata. Geotechnical models are commonly based on geomorphological data combined with direct and intrusive geotechnical investigations. However, the existence of numerous empirical correlations between seismic parameters (e.g., S-wave velocity) and geotechnical parameters in the literature has made it possible to investigate areas that are difficult to reach with direct instrumentation. These correlations are often overlooked even though they enable a reduction in investigation costs and time. By means of geophysical tests, it is in fact possible to estimate the N-SPT value and derive the friction angle from results obtained from environmental seismic noise measurements. Despite the empirical character and a certain level of uncertainty derived from the estimation of geotechnical parameters, these are particularly useful in the preliminary stages of an emergency, when straight data are not available and on all those soils where other direct in situ tests are not reliable. These correlations were successfully applied to the Theilly landslide (Western Alps, Italy), where the geotechnical model was obtained by integrating the results of a multi-parameter geophysical survey (H/V seismic noise and ground-penetrating radar) with stratigraphic and geomorphological observations, digital terrain model and field survey data. The analysis of the triggering conditions of the landslide was conducted by means of hydrological–geotechnical modelling, evaluating the behaviour of the slope under different rainfall scenarios and considering (or not) the stabilisation interventions present on the slope. The results of the filtration analyses for all events showed a top-down saturation mechanism, which led to the formation of a saturated face with a maximum thickness of 5 m. Stability analyses conducted for the same events showed the development of a shallow landslide in the first few metres of saturated soil. The modelling results are compatible with the actual evolution of the phenomenon and allow us to understand the triggering mechanism, providing models to support future interventions.

Geophysical and Geotechnical Evaluation of Landslide Slip Surface in a Residual Soil for Monitoring of Slope Instability

Application of Combined Electrical Resistivity Tomography (ERT) and Seismic Refraction Tomography (SRT) Methods to Investigate Xiaoshan District Landslide Site: Hangzhou, China

Analysis of Geotechnical-Assisted 2-D Electrical Resistivity Tomography Monitoring of Slope Instability in Residual Soil of Weathered Granitic Basement

Assessment of Spatiotemporal Changes in Water Contents of Landslide Zone by Geophysical Methods: A Case Study

Analysis of soil electrical resistivity and hydraulic conductivity relationship for characterisation of lithology inducing slope instability in residual soil

Enhancing weathered slope stability assessment through the integration of slake durability index, elastic modulus of knocking ball, and electrical resistivity tomography

Landslide Investigation Using Seismic Refraction Tomography Method: A Review

A novel subsurface slopes hazardous mapping with engineering geologic and geophysical characterizations

High-resolution geophysical monitoring of moisture accumulation preceding slope movement – a path to improved early warning

Landslide assessment through integrated geoelectrical and seismic methods: A case study in Thungsong site, southern Thailand

2D and 3D ground model development for mountainous landslide investigation

Geophysical Surveys for Geotechnical Model Reconstruction and Slope Stability Modelling

Multiyear time-lapse ERT to study short- and long-term landslide hydrological dynamics

Investigating the location of zone prone to reactivation due to water saturation on landslide debris using electrical resistivity tomography

Investigation and monitoring on a rainfall-induced deep-seated landslide

An application of the high-density electrical resistivity method for detecting slide zones in deep-seated landslides in limestone areas

Assessment of rainfall-induced slope failures at Chakargoan, Port Blair, India, using 2D ERT and self-potential techniques

Slope Monitoring Study Using Soil Mechanics Properties and 4-D Electrical Resistivity Tomography Methods

Assessments of Geotechnical Condition of Landslide Sites and Slope Stability Analysis Using Limit Equilibrium Method around Gundwin Town Area, Northwestern Ethiopia

Investigation and monitoring of rotational landslides in El Mokkattam plateau Egypt, using integrated geological and geophysical techniques

Geophysical and numerical stability analysis of landslide incident