Evaluating instability & failure pattern of landslides, Giri valley, Northwest Himalaya, India
Raghuveer Negi,Saraswati Prakash Sati,Vikram Sharma,Manojit Samanta,Vipin Kumar,Mohit Kumar Puniya,Sanjay Singh Rana,Debi Prasanna Kanungo
DOI: https://doi.org/10.1007/s10064-024-03767-x
IF: 4.2
2024-06-12
Bulletin of Engineering Geology and the Environment
Abstract:This study aimed to evaluate the slope instability and failure patterns of four major landslides of the Giri Valley, Northwest Himalaya. The study area i.e., Giri valley has not been studied much despite a history of frequent landslides in the region. In order to fulfill this gap and evaluate the potential failure pattern, methodology involved a comprehensive analysis of Rock Mass Rating (RMR), Kinematic Analysis (KA), Slope Mass Rating (SMR), Geotechnical characterization (GA), and Limit Equilibrium Method (LEM). Results revealed that the all four landslide slopes exhibit pronounced fracturing and low Rock Quality Designation (RQD) in the rock masses, which is attributed to their spatial proximity to the Main Boundary Thrust (MBT) Fault in the region. The RMR values ranged from 28 to 38 and the SMR values ranged from 20 to 30, implying that the rock itself might not be too weak, but there could be other factors contributing to instability. The Kinematic Analysis revealed planar failure conditions in all the four landslides, indicating the possibility of landslides occurrence along well-defined planes of weakness in the rock mass. Further, The LEM based Factor of Safety (FOS) values ranged from 0.9 to 1.4, which can be attributed to a critical state, where even a small increase in driving forces or decrease in resisting forces could trigger a landslide. The low FOS values indicate a potential for instability, and mitigation measures may be necessary to ensure slope stability in the region. These measures could include slope reinforcement, drainage improvement, or restricting activities that could increase the driving forces on the slopes. These methods can be regionally replicable if the rock mass characteristics are similar across the region. However, site-specific data collection and analysis are crucial for accurate assessment.
engineering, environmental,geosciences, multidisciplinary, geological