Abstract:Landslide susceptibility (LSI) modeling of Darjeeling–Sikkim Himalaya is performed by integrating 28 causative factors on 28C28 combinations on Geographical Information System (GIS) following analytic hierarchy process (AHP)-based multicriteria decision protocol, logistic regression (LR)-based multivariate technique, machine learning data-driven random forest (RF) and artificial neural network (ANN) methods wherein the terrain is classified into 'None' (with: 0.0 < LSI ≤ 0.17), 'Low' (with: 0.17 < LSI ≤ 0.34), 'Moderate' (with: 0.34 < LSI ≤ 0.51), 'High' (with: 0.51 < LSI ≤ 0.68),'Very High' (with: 0.68 < LSI ≤ 0.85) and 'Severe' (with: 0.85 < LSI ≤ 1.00) susceptible zones as validated through standard statistical accuracy tests and direct cross-correlation analysis of all the susceptible zonation maps generated by drawing comparison with the 30% landslide inventory test data. The best integrated thematic RF-based LSI vector layer with an accuracy level of 0.871, in turn, on integration with the vulnerability components like population density, number of households, building types, building height and building density has demarketed approximately 21% of the region under 'Very High' to 'Severe' socioeconomic risk zone while about 36% area are classified under 'Very High' to 'Severe' structural risk zone as implicated by devastating landslide hazards in the region. Ground Penetrating Radar Survey has been conducted on all the slopes in the 'Very High to Severe' landslide susceptible zones wherein near-surface lithologic setting, presence of paleo-slopes and microstructural features like fractures/faults and poorly stratified debris flow have been imaged that provided favorable subsurface conditions for slope failure. Finite element method-based slope failure analysis for Newmark displacement estimates factor of safety (FoS) value that acts as the proxy in defining the degree of slope instability is seen to vary between 1.905 and 2.357 in the 'Low to Moderate' landslide susceptible zone while it ranges between 1.051 and 1.652 in the 'High' landslide susceptible zone and between 0.649 and 1.349 in the 'Very High to Severe' landslide inventory subset along the slopes under both gravity loading and seismic shaking in the terrain. The slope stability analysis puts the yield acceleration between 0.0012 and 0.11984 m/s2 and the total deformation between 0.0027 and 1.4484 m. All these parameters in the classified landslide susceptible zones in unison demonstrate how unstable are the terrain slopes in the 'High to Severe' landslide susceptible zones.

Assessment of rainfall-induced slope failures at Chakargoan, Port Blair, India, using 2D ERT and self-potential techniques

Application of Combined Electrical Resistivity Tomography (ERT) and Seismic Refraction Tomography (SRT) Methods to Investigate Xiaoshan District Landslide Site: Hangzhou, China

Assessment of Spatiotemporal Changes in Water Contents of Landslide Zone by Geophysical Methods: A Case Study

Landslide Investigation Using Seismic Refraction Tomography Method: A Review

Landslide assessment through integrated geoelectrical and seismic methods: A case study in Thungsong site, southern Thailand

Geophysical and Geotechnical Evaluation of Landslide Slip Surface in a Residual Soil for Monitoring of Slope Instability

Study of substrata of a slope susceptible to landslide in hilly environment using a geophysical method in the Nilgiris, India

Analysis of Geotechnical-Assisted 2-D Electrical Resistivity Tomography Monitoring of Slope Instability in Residual Soil of Weathered Granitic Basement

Characterisation of Landslide using InSAR Technique and Electrical Resistivity Method at Paya Terubong, Malaysia

IoT-Based Geotechnical Monitoring of Unstable Slopes for Landslide Early Warning in the Darjeeling Himalayas

Analysis of soil electrical resistivity and hydraulic conductivity relationship for characterisation of lithology inducing slope instability in residual soil

Enhancing weathered slope stability assessment through the integration of slake durability index, elastic modulus of knocking ball, and electrical resistivity tomography

High-resolution geophysical monitoring of moisture accumulation preceding slope movement – a path to improved early warning

A novel subsurface slopes hazardous mapping with engineering geologic and geophysical characterizations

Exploitation of optical and SAR amplitude imagery for landslide identification: a case study from Sikkim, Northeast India

Remote sensing GIS-based landslide susceptibility & risk modeling in Darjeeling–Sikkim Himalaya together with FEM-based slope stability analysis of the terrain

Influencing factors on the simulation of rainfall-induced landslide prediction based on case study

Analysis of long-term trends of rainfall and extreme rainfall events over Andaman & Nicobar and Lakshadweep Islands of India

Investigating the location of zone prone to reactivation due to water saturation on landslide debris using electrical resistivity tomography

Geotechnical Characterization and PS-InSAR for Risk Analysis of Solang Landslide in Beas Valley, NW Himalaya: A Wake-Up Call!

Assessing classification system for Landslide susceptibility using Frequency Ratio, Analytical hierarchical process and geospatial technology mapping in Aizawl district, NE India