Abstract:In this work, the influences of excess amount of sodium ions and the way/duration of ageing of the reaction mixture (hydrogel) on structural, particulate, morphological and chemical properties of the crystalline end products obtained by hydrothermal treatment (heating at 483K for 2h) of the TPA-free reaction mixture: 1.0Al2O3/100SiO2/xNa2O/4000H2O/yNa2SO4 (0.4⩽(x+y)⩽100) seeded by silicalite-1 nanocrystals (260nm, 4wt.% of silica in gel mixture), was investigated by different characterization methods such as, powder X-ray diffraction (XRD), scanning-electron microscopy (SEM), particle size distribution (PSD) measuring by laser light scattering (LLS) and X-ray fluorescence (XRF). The obtained results showed that addition of sodium sulfate in low-alkaline reaction mixture enhances the aggregation of the particles of colloidal silica and formation of gel by the action of sulfate oxy-anions while in high-alkaline reaction mixtures the condensation process takes place on the surface of the crystalline end products. Excess amount of sodium ions do not increase the crystallization rate thus showing that the rate-determining factor is concentration of “free” low-molecular weight silicate species, determined by the alkalinity of system. On the other hand, addition of sodium sulfate considerably reduces the formation of crystal aggregates, by combined chemical and electrical interactions. Ageing of the reaction mixture (hydrogel) mainly influences the particle size distribution of the crystalline end products, which is explained by the change in the relative rates of crystal growth and crystal aggregation with the time of ageing. However, hydrogel ageing does not affect the size and number of crystals in the crystalline end product, showing that the growth precursor particles form during hydrothermal treatment of the reaction mixture and not during its room-temperature ageing.

Effect of the Aging Temperature of Gel on the Synthesis and Properties of the Silicoaluminophosphate Molecular Sieve SAPO-11

Crystallization of SAPO-11 Molecular Sieves Prepared from Silicoaluminophosphate Gels Using Boehmites with Different Properties

The Role of Intermediate Phases in the Crystallization of Aluminophosphate Sieves on Examples of AlPO-11 and AlPO-41

Relation between Morphology and Porous Structure of SAPO-11 Molecular Sieves and Chemical and Phase Composition of Silicoaluminophosphate Gels

Effects of Gel Preparation Conditions on the Crystallization of SAPO-11 Molecular Sieves

Regulating acidity, porosity, and morphology of hierarchical SAPO-11 zeolite by aging treatment

Changing Template/Al2O3 Ratio in Reaction Gel—An Effective Way to Regulate Nature of Intermediate Phases and Properties of SAPO-11 Molecular Sieves during Crystallization

Influence of the formation conditions of aluminophosphate gels on the morphology and pore structure of molecular sieve AlPO4-11

Influence of the Nature of the Al Source on the Properties of the Initial Reaction Gels for Crystallization of Molecular Sieve AlPO4-11

Studies on preparing molecular sieves AIPO4-5 and AIPO4-11 by the vapour phase method

Multinuclear solid-state NMR studies on the formation mechanism of aluminophosphate molecular sieves in ionic liquids

Study on the crystallization mechanism of molecular sieve SAPO-34

Synthesis and Application of SAPO-11 Molecular Sieves Prepared from Reaction Gels with Various Templates in the Hydroisomerization of Hexadecane

Controllable and SDA-free synthesis of sub-micrometer sized zeolite ZSM-5. Part 2: Influence of sodium ions and ageing of the reaction mixture on the chemical composition, crystallinity and particulate properties of the products

Synthesis of Nanosized NaY Molecular Sieve under Dynamic Hydrothermal Crystallization

SYNTHESIS AND CHARACTERIZATION OF SILICOALUMINOPHOSPHATE MOLECULAR SIEVES FROM METAKAOLIN

Synthesis of Al–Si-beta and Ti–Si-beta by the Aging–drying Method

Effect of silica/alumina ratio and structure-directing agent on the physical and chemical properties of SAPO-34

Influence of hydrogel aging temperature in the formation of mesoporous molecular sieve MCM-48

Vapor Phase Transport Synthesis and Structure Characterization of an Aluminophosphate Molecular Sieve [Al3P3O12F][C5H5NH]center dot 0.2H(2)O

Effect of fluoride ions on the stability of SAPO-11 molecular sieves