Abstract:All industrially available zeolites are obtained from hydrogel systems. Unfortunately the level of understanding of the events preceding zeolite crystallization is far from satisfactory. In this respect, revealing the nature of the processes taking place in the precursor gel is of paramount importance to understanding zeolite nucleation. The investigation of the gel structure, however, is a difficult task due to the complexity of the object in terms of both composition and topology. Therefore, a combination of hyperpolarized (HP) (129)Xe NMR-N(2) adsorption-high-resolution transmission electron microscopy-energy-dispersive spectrometry methods complemented by X-ray diffraction, infrared spectroscopy, scanning electron microscopy, and chemical analyses has been employed to study the changes in composition and structure of sodium hydroxide rich aluminosilicate gel yielding zeolite A. The role of each component in the system and the entire sequence of events during the induction, nucleation, and crystallization stages have been revealed. The high concentration of sodium hydroxide in the studied system has been found to control the size and structure of the gel particles in the beginning stage. During the initial polymerization of aluminosilicate species a significant part of the sodium hydroxide is expelled from the gel into the solution, which restricts extensive polymerization and leads to formation of small aluminosilicate particles with open pore structure. The induction period that follows is marked by incorporation of Na back in the bulk gel. The combined action of the Na ion as a structure-directing agent and the hydroxyl group as a mobilizer results in partial depolymerization of the gel and formation of voids with mesopore sizes. The nucleation maximum coincides temporally with development of pores with sizes in the range of 2-5 nm. The amorphous gel undergoes into crystalline zeolite only after these pores have disappeared and the chemistry of the gel has evolved to reach the stoichiometric zeolite composition. It was established unambiguously by high-resolution transmission electron microscopy and HP (129)Xe NMR that the nucleation of zeolite occurs in the solid part of the system and the succeeding crystallization commences only after the nuclei are released into the liquid, which is consistent with the autocatalytic mechanism. Also this investigation has demonstrated the unrivaled sensitivity of HP (129)Xe NMR that is capable of identifying presence of small amounts of crystalline zeolite material in amorphous medium with detection limit extending below 1 wt %.

Effects of Gel Preparation Conditions on the Crystallization of SAPO-11 Molecular Sieves

Crystallization of SAPO-11 Molecular Sieves Prepared from Silicoaluminophosphate Gels Using Boehmites with Different Properties

Relation between Morphology and Porous Structure of SAPO-11 Molecular Sieves and Chemical and Phase Composition of Silicoaluminophosphate Gels

Effect of the Aging Temperature of Gel on the Synthesis and Properties of the Silicoaluminophosphate Molecular Sieve SAPO-11

Changing Template/Al2O3 Ratio in Reaction Gel—An Effective Way to Regulate Nature of Intermediate Phases and Properties of SAPO-11 Molecular Sieves during Crystallization

Synthesis and Application of SAPO-11 Molecular Sieves Prepared from Reaction Gels with Various Templates in the Hydroisomerization of Hexadecane

Effect of silica/alumina ratio and structure-directing agent on the physical and chemical properties of SAPO-34

Influence of the formation conditions of aluminophosphate gels on the morphology and pore structure of molecular sieve AlPO4-11

Study on the crystallization mechanism of molecular sieve SAPO-34

Influence of the Nature of the Al Source on the Properties of the Initial Reaction Gels for Crystallization of Molecular Sieve AlPO4-11

Effect of synthesis medium and synthesis conditions on physicochemical properties of hierarchical SAPO‐11 molecular sieve synthesized via fractional crystallization method

The Role of Intermediate Phases in the Crystallization of Aluminophosphate Sieves on Examples of AlPO-11 and AlPO-41

Synthesis and hydrogen isomerization performance of ordered mesoporous nanosheet SAPO-11 molecular sieves

Investigation of the Physicochemical Changes Preceding Zeolite Nucleation in a Sodium-Rich Aluminosilicate Gel.

Studies on synthesis and acidity of a single organic compund templated SAPO-11 molecular sieve

Synthesis and Characterization of SAPO-11 Molecular Sieves from Alcoholic Systems

Preparation of Zeolite NaA Membranes on Macroporous Alumina Supports by Secondary Growth of Gel Layers

Studies on preparing molecular sieves AIPO4-5 and AIPO4-11 by the vapour phase method

Synthesis, characterization and catalytic properties of SAPO-11 molecular sieve synthesized in hydrothermal media using di-isopropylamine as template

Regulating acidity, porosity, and morphology of hierarchical SAPO-11 zeolite by aging treatment

Preparation and n-hexadecane hydroisomerization properties of SAPO-11-based composite molecular sieve